Bedienungsanleitung Greenworks 20157 - G-MAX 40V (Seite 19 von 124) (Alle Sprachen)

644728

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

ENGLISH

(Original instructions)

1

Ƈ Align the groove on the outside of the coupling end of the

handle (3) with the tongue on the inside of the coupling

end of the saw head (4). Push the saw head (4) onto the

handle (3).

Ƈ Slide the collar (14) upwards and rotate it counter-clockwise

until it is fully tightened.

Warning! Periodically check the connections to ensure that

they are tightened securely.

tube (9) between the saw head (4) and the handle (3).

Ƈ Align the groove on the outside of the coupling end of the

handle (3) with the tongue on the inside of the coupling

end of the extension tube (9).

Ƈ Push the extension tube (9) onto the handle (3).

Ƈ Slide the collar (15) upwards and rotate it counter-clockwise

until it is fully tightened.

Ƈ Align the groove on the outside of the coupling end of the

extension tube (9) with the tongue on the inside of the

coupling end of the saw head (4).

Ƈ Push the saw head (4) onto the extension tube (9).

Ƈ Slide the collar (14) upwards and rotate it counter-clockwise

until it is fully tightened.

Warning! Periodically check the connections to ensure that

they are tightened securely.

Ƈ To remove the saw head (4), rest the handle (3) on the

ground, loosen the collar (14) and take off the saw head.

Use

Warning! Let the tool work at its own pace. Do not

overload.

easily done before.

The battery may become warm while charging; this is normal

and does not indicate a problem.

Warning! Do not charge the battery at ambient

temperatures below 10°C or above 40°C. Recommended

charging temperature: approximately. 24°C.

Note: The charger will not charge a battery if the cell

temperature is below approximately 10°C or above 40°C.

Ƈ The battery should be left in the charger and the

charger will begin to charge automatically when the cell

temperature warms up or cools down.

Ƈ To charge the battery (10), remove it from the tool and

the charger in one way. Do not force. Be sure that the

battery is fully seated in the charger.

Ƈ Plug in the charger and switch on at the mains.

iulluminate

The charge is complete when the charging indicator (24)

lights green continuously. The charger and the battery can

red

tops off the battery charge. The charging indicator (24) will

be lit as long as the battery is connected to the plugged-in

charger.

Ƈ Charge discharged batteries within 1 week. Battery life

will be greatly diminished if stored in a discharged state.

Leaving the battery in the charger

The charger and battery pack can be left connected

pack fresh and fully charged.

Charger diagnostics

If the charger detects a weak or damaged battery, the

as follows:

Ƈ Re-insert the battery (10).

rate, use a different battery to determine if the charging

process works properly.

Ƈ If the replaced battery charges correctly, the original

battery is defective and should be returned to a service

centre for recycling.

Ƈ If the new battery gives the same indication as the

original battery, take the charger to be tested at an

authorised service centre.

Note: It may take as long as 60 minutes to determine that

the battery is defective.

For your safety, this tool is equipped with a double switching

system. This system prevents starting the tool inadvertently.

Switching on

Ƈ Push the lock-off button (2) backward using your thumb

and at the same time squeeze the on/off switch (1).

Ƈ Release the lock-off button (2).

Switching off

Ƈ Release the on/off switch (1).

Warning! Never attempt to lock a switch in the on position.

charger occasionally

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Greenworks 20157 - G-MAX 40V Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info