Bedienungsanleitung Greenworks 2600107 - 80V Pro (Seite 21 von 292) (Alle Sprachen)

644686

Zoom out

Zoom in

Vorherige Seite

1/292

Nächste Seite

EN - 10

7. MAINTENANCE

7.1 GENERAL INFORMATION

IMPORTANT The safety regulations to

follow during machine use are described in

par. 2.4. Strictly comply with these instructions

to avoid serious risks or hazards.

All service and all maintenance checks

must be carried out on a stationary machine

and remove the key from the compartment.

Wear adequate clothing, gloves

and goggles before carrying

out any maintenance.

 The frequency and types of maintenance

are summarised in the "Maintenance

Table". The table will help you maintain

your machine’s safety and performance.

It summarises the main interventions to

be made and the frequency applicable

to each of them. Carry out the relevant

intervention according to the

deadline.

 The use of non-genuine spare parts and

accessories could adversely

machine

operation and safety. The manufacturer shall

decline all liability in the event of injuries

or damages caused by such parts.

 Genuine spare parts are supplied by

authorized assistance workshops and dealers.

IMPORTANT All the maintenance and

adjustment operations not described

herein must be carried out by your dealer

or Authorised Service Centre.

7.2 CLEANING

Carry out cleaning operations with the

 Releasing the auger control.

 Removing the ignition key

 Removing the battery

Always clean the machine after use.

To clean the machine adhere to the

instructions provided below:

 Stop the motor

 Remove the battery from its compartment.

 Cool the snow thrower.

 Clean the snow thrower internally

and externally with an adequate

brush and/or compressed air.

Never wash the snow thrower with

water, otherwise the electric device will be

damaged causing the risk of electrocution.

8. STORAGE

If you intend to put your machine

away for more than 30 days:

1. Clean the snow thrower thoroughly.

2. Check for any damage. If necessary,

see to the necessary repairs.

3. If the paintwork is damaged,

touch it up to prevent rust.

4. Protect any exposed metal surfaces from rust.

9. ASSISTANCE AND REPAIRS

This manual provides all the necessary

information to run the machine and for correct

basic maintenance operations which can

be performed by the user. Any regulations

and maintenance operations not described

herein must be carried out by your Dealer

or Authorized Service Centre, which have

the necessary knowledge and equipment to

ensure that the work is carried out correctly,

maintaining the correct degree of safety and the

original operating conditions of the machine.

Any operations performed in unauthorized

centres or by

persons will totally

invalidate the Warranty and all obligations

and responsibilities of the Manufacturer.

 Only authorized service workshops can carry

out guaranteed repairs and maintenance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Greenworks 2600107 - 80V Pro Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info