Bedienungsanleitung Greenworks G24ST - 2101207 (Seite 6 von 162) (Alle Sprachen)

708335

Zoom out

Zoom in

Vorherige Seite

1/162

Nächste Seite

English (original instructions)

DE ES IT FR PT NL RU FI SV NO DA PL CS SK SV HR HU RO BG EL AR TR HE LT LV ET

STORING THE TRIMMER

 Remove the battery pack from the trimmer before

storing.

 Store it in a place that is inaccessible to children.

 Keep away from corrosive agents such as garden

chemicals and de-icing salts.

 Store and charge your batteries in a cool area.

Temperatures above or below normal room

temperature will shorten battery pack life.

 Store the battery pack where the temperature is below

27˚C and away from moisture.

 All batteries gradually lose their charge. The higher the

temperature, the quicker they lose their charge. If you

store your unit for long periods of time without using

it, recharge the batteries every month or two. This

practice will prolong battery pack life.

 Secure the trimmer during transport to prevent damage

or injury. Clean and maintenance before storage, use

of guards on cutting attachments with metal blades.

Use of cover for metal blades during transport and

storage.

ENVIRONMENTAL PROTECTION

 Environmental protection should be a priority of

considerable importance when using the machine,

for the benefit of both social coexistence and the

environment in which we live. Try not to cause any

disturbance to the surrounding area.

 Scrupulously comply with local regulations for the

disposal of packaging, deteriorated parts or any

elements with a strong environmental impact; this

waste must not be disposed of as normal waste, it must

be separated and taken to specified waste disposal

centres where the material will be recycled.

 Scrupulously comply with local regulations for the

disposal of waste materials after mowing.

 At the time of decommissioning, do not pollute the

environment with the machine, but hand it over to a

disposal centre, in accordance with the local laws in

force.

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE SOLUTION

String will not advance when using

the auto-feed head.

String is welded to itself. Lubricate with silicone spray.

Not enough string on spool. Install more string. Refer to string

replacement earlier in this manual.

String is worn too short. Pull string while pressing line release

button.

String is tangled on spool. Remove string from spool and rewind.

Refer to string replacement earlier in

this manual.

Grass wraps around shaft housing

and string head.

Cutting tall grass at ground level Cut tall grass from the top down to

prevent wrapping.

Motor fails to start when switch trigger

is depressed.

Battery is not secure. To secure the battery pack, make

sure the latch on bottom of the battery

pack snaps into place.

Battery is not charged. Charge the battery pack according

to the instructions included with your

model.

Shaft not connected completely Make sure lower shaft is fully seated

in shaft coupler on upper shaft and

secure shaft coupler.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Greenworks G24ST - 2101207 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info