Bedienungsanleitung Greenworks GD40CS - 20077 (Seite 17 von 256) (Alle Sprachen)

708317

Zoom out

Zoom in

Vorherige Seite

1/256

Nächste Seite

English

FR DE ES IT PT NL SV DA NO FI HU CS RU RO PL SL HR ET LT LV SK BG

Carry the chain saw by the front handle with the

chain saw switched off and away from your body.

When transporting or storing the chain saw, always fit

the guide bar cover. Proper handling of the chain saw

will reduce the likelihood of accidental contact with the

moving saw chain.

Follow instructions for lubricating, chain

tensioning and changing accessories. Improperly

tensioned or lubricated chain may either break or

increase the chance for kickback.

Keep handles dry, clean, and free from oil and

grease. Greasy, oily handles are slippery, causing

loss of control.

Cut wood only. Do not use chain saw for purposes

not intended. For example: do not use chain saw

for cutting plastic, masonry or non-wood building

materials. Use of the chain saw for operations other

than intended could result in a hazardous situation.

CAUSES AND OPERATOR PREVENTION OF

KICKBACK:

Kickback may occur when the nose or tip of the guide

bar touches an object, or when the wood closes in and

pinches the saw chain in the cut.

Tip contact in some cases may cause a sudden reverse

reaction, kicking the guide bar up and back towards the

operator.

Pinching the saw chain along the top of the guide bar may

push the guide bar rapidly back towards the operator.

Either of these reactions may cause you to lose control of

the saw which could result in serious personal injury. Do

not rely exclusively upon the safety devices built into your

saw. As a chain saw user, you should take several steps

to keep your cutting jobs free from accident or injury.

Kickback is the result of tool misuse and/or incorrect

operating procedures or conditions and can be avoided by

taking proper precautions as given below:

Maintain a firm grip, with thumbs and fingers encircling

the chain saw handles, with both hands on the saw

and your body and arm positioned to allow you to

resist kickback forces.

Kickback forces can be controlled by the operator,

if proper precautions are taken. Do not let go of the

chain saw.

Do not overreach and do not cut above shoulder

height. This helps prevent unintended tip contact and

enables better control of the chain saw in unexpected

situations.

Only use replacement bars and chains specified by

the manufacturer. Incorrect replacement bars and

chains may cause chain breakage and/or kickback.

Follow the manufacturer’s sharpening and

maintenance instructions for the saw chain.

Decreasing the depth gauge height can lead to

increased kickback.

ADDITIONAL WARNINGS

It has been reported that vibrations from hand-held

tools may contribute to a condition called Raynaud’s

Syndrome in certain individuals. Symptoms may

include tingling, numbness and blanching of the

ﬁ ngers, usually apparent upon exposure to cold.

Hereditary factors, exposure to cold and dampness,

diet, smoking and work practices are all thought to

contribute to the development of these symptoms. It

is presently unknown what, if any, vibrations or extent

of exposure may contribute to the condition. There

are measures that can be taken by the operator to

possibly reduce the effects of vibration:

●Keep your body warm in cold weather. When

operating the unit wear gloves to keep the hands

and wrists warm. It is reported that cold weather

is a major factor contributing to Raynaud’s

Syndrome.

●After each period of opera ion, exercise to increase

blood circulation.

●Take frequent work breaks. Limit the amount of

exposure per day.

If you experience any of the symptoms of this condition,

immediately discontinue use and see your physician about

these symptoms.

The recommended cutting capacity of his chain saw

is 153mm (6 in.) and smaller to prolong the life of the

tool and allow for safest operation. Cut ing logs with

a diameter larger than this will cause excess wear on

your tool. Logs with a maximum diameter of 229mm

(9in.) can be cut, but should only be done so rarely

and with caution.

The integral spiked bumper is designed to assist

cutting. When forced against the log while cutting it

provides a more stable pivot point.

Any chainsaw is potentially lethal if used

inappropriately. It is strongly suggested hat you seek

professional training in the safety and use of this tool.

SAVE THESE INSTRUCTIONS. REFER TO THEM

FREQUENTLY AND USE THEM TO INSTRUCT OTHERS

WHO MAY USE THIS UNIT. IF YOU LOAN SOMEONE

THIS UNIT, LOAN THEM THESE INSTRUCTIONS ALSO.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Greenworks GD40CS - 20077 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info