Bedienungsanleitung Greenworks GD80BL - 2400407 (Seite 11 von 210) (Alle Sprachen)

708280

Zoom out

Zoom in

Vorherige Seite

1/210

Nächste Seite

English (original instructions)

■ Keep all cooling air inlets clear of debris.

■ Never blow debris in the direction of bystanders

■ Before starting the machine, make certain that the

feeding chamber is empty.

■ Keep your face and body away from the feed intake

opening.

■ Do not allow hands or any other part of the body or

clothing inside the feeding chamber, discharge chute,

or near any moving part.

■ When feeding material into the machine be extremely

careful that pieces of metal, rocks, bottles, cans or

other foreign objects are not included.

■ If the cutting mechanism strikes any foreign objects

or if the machine should start making any unusual

noise or vibration, immediately shut off the power

source and allow the machine to stop. Disconnect the

machine from the supply and take the following steps

before restarting and operating the machine: i)

inspect for damage;

ⅰ) replace or repair any damaged parts;

ⅱ) check for and tighten any loose parts.

■ Do not allow processed material to build up in the

discharge zone; this may prevent proper discharge

and can result in kickback of material through the

intake opening.

■ If the machine becomes clogged, shut-off the power

source and disconnect the machine from supply

before cleaning debris.

■ Never operate the machine with defective guards or

shields, or without safety devices, for example debris

collector in place.

NOTE If a debris collector is not used the text of the

example may be deleted.

■ Keep the power source clean of debris and other

accumulations to prevent damage to the power

source or possible fire.

■ Do not transport this machine while the power source

is running.

■ Do not tilt the machine while the power source is

running.

■ Do not operate the machine when barefoot or

wearing open sandals. Avoid wearing clothing that is

loose fitting or that has hanging cords or ties.

■ Always stand clear of the discharge zone when

operating this machine.

■ Stop the machine, and remove battery pack. Make

sure that all moving parts have come to a complete

stop

- whenever you leave the machine,

- before clearing blockages or unclogging chute,

- before checking, cleaning or working on the machine.

MAINTENANCE AND STORAGE

■ Keep all nuts, bolts and screws tight to be sure the

appliance is in safe working condition.

■ Replace worn or damaged parts.

Your machine has been engineered and manufactured to

Greenworks tools’s high standard for dependability, ease

of operation, and operator safety. When properly cared

for, it will give you years of trouble-free performance.

For use with tool only.

GENERAL SAFETY WARNINGS

WARNING

When using battery operated tools basic safety

precautions should always be followed to reduce the

risk of fire, leaking batteries and personal injury,

including the following.

■ Do not touch the fan when operating this unit.

■ Keep the handles dry and clean.

TRAINING

■ Read the instructions carefully be familiar with the

controls and the proper use of the appliance.

■ Never allow children to use the appliance.

■ Never allow people unfamiliar with these instructions

for use the appliance local regulations may restrict

the age of the operator.

■ Never operate the appliance while people especially

children, or pets are nearby.

■ The operator or user is responsible for accidents or

hazards occurring to other people or their properly.

PREPARATION

■ While operating the appliance, always wear

substantial footwear and long trousers.

■ Do not wear loose clothing or jewellery that can be

drawn into the air inlet. Keep long hair away from the

air inlets.

■ Obtain ear protection and safety glasses. Wear them

at all times while operating the machine.

■ Wearing a face mask is recommended to prevent

dust irritation.

■ Operate the machine in a recommended position and

only on a firm, level surface.

■ Do not operate the machine on a paved or gravel

surface where ejected material could cause injury.

■ Before using, always visually inspect to see, that the

shredding means, shredding means bolts and other

fasteners are secure, the housing is undamaged and

that guards and screens are in place. Replace worn

or damaged components in sets to preserve balance.

Replace damaged or unreadable labels.

OPERATION

■ Operate the appliance only in daylight or in good

artificial light.

■ Do not overreach and keep your balance at all times.

■ Always be sure of your footing on steps.

■ Walk, never run.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Greenworks GD80BL - 2400407 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info