627202
28
Zoom out
Zoom in
Vorherige Seite
1/148
Nächste Seite
28
GB
Do not operate the equipment in the
vicinity of inammable liquids or gases
as this could give rise to the danger of
a re or explosion.
Store the equipment in a dry place that
is not accessible to children.
CAUTION! The following states how
damage to the equipment and possi-
ble injury to people can be avoided:
Taking care of the equipment:
Ensure that the ventilation openings are
not clogged.
Only use spare parts and accessories
that have been supplied or recommend-
ed by the manufacturer.
Never try to repair the equipment your-
self. All work that has not been listed in
these Instructions must only be carried
out by an authorised servicing agency.
Treat the equipment with the greatest
care. Always keep the equipment clean
for better and safer work. Follow the
maintenance instructions.
Never overload the equipment. Always
work within the stated capacity range.
Do not use low-power machines for
heavy-duty work. Do not operate the
equipment for purposes for which it is
not intended.
Always inspect the equipment before it
is to be used. Do not operate the equip-
ment if safety devices, parts of the cut-
ting device or bolts are missing, worn
out or damaged.
Electrical safety:
CAUTION! The following states how
to avoid accidents and injuries due
to electric shock:
Before each usage, check the mains
power cable and the extension cable
for damage and signs of aging. Do not
use the device if the cable is damaged
or worn. Damaged mains power cables
increase the risk of electric shock.
Always keep the extension cable well
away from the cutting tools.
Should the power cable become
damaged during work, then instantly
disconnect the power cable from the
mains. DO NOT TOUCH THE POWER
CABLE BEFORE IT HAS BEEN DIS-
CONNECTED FROM THE MAINS!
Risk of electric shock.
If the power cable for this equipment
is damaged, it must be replaced with a
special power cable, which is available
from the manufacturer or a customer
service agent of the same.
Check that the mains voltage is the
same as indicated on the rating plate.
Wherever possible connect the equip-
ment to a power socked with a residual-
current circuit breaker that has a rated
current of not more than 30 mA.
Protect the equipment from moisture.
The equipment must not be moist nor
operated in a moist environment. Water
entry into the equipment increases the
risk of electric shock.
Avoid body contact with earthed parts
(e.g. metal fences, metal posts). There
is an increased risk of electric shock if
your body is earthed.
Only use extension cables with a
maximum length of 75 m that have
been approved for open-air use. The
stranded cord diameter of the exten-
sion cable must be at least 2.5 mm
2
.
Always unreel a cable drum to its full
length so that the entire cable can be
inspected for damage.
Never pass an operating equipment
over the extension cable. Ensure that
28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Grizzly ART 2420 Lion Set wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info