Bedienungsanleitung Grizzly BRM 51-190 BSA (Seite 81 von 152) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

628192

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

and other ller caps in the event of

damage.

• Replace defective silencers.

• Before use, always carry out a visual

inspection to check whether the cutting

tools, mounting bolts and entire cutting

unit are worn or damaged. To avoid

imbalance, only replace worn or dam-

aged tools and bolts in sets.

• Take care with equipment that has

several cutting tools, as the movement

of one blade may result in rotation of

other blades.

• Use only replacement parts and ac-

cessories supplied and recommended

by the manufacturer. The use of parts

from other manufacturers may result

in injuries and will result in immediate

invalidation of the guarantee.

Handling:

• Do not run the combustion engine in

enclosed spaces, in which dangerous

carbon monoxide can collect.

• Mow only in daylight or with good arti-

cial lighting. An unlit working area can

result in accidents.

• If possible, avoid using the equipment

on wet grass.

• Always ensure a safe stance, particu-

larly on slopes. This will give you better

control of the equipment in unexpected

situations.

- Always work across the slope, never

upwards or downwards.

- Take particular care when changing

the direction of travel on the slope.

- Do not mow on excessively steep

slopes (max. 10°).

• Run the equipment only at walking

speed.

• Take particular care when turning the

equipment around or pulling it towards

you.

• Stop the cutting tool if the equipment

has to be tipped up for transportation

over a surface other than grass and

when moving the equipment from and

to the surface to be mown.

• Do not use the equipment with dam-

aged safety equipment or guards or

with no safety equipment attached, e.g.

impact protection and/or grass catch-

ers. This ensures that the equipment

remains safe.

• Do not change the engine regulator

setting and do not over-rev it. This may

damage the equipment.

• Before starting, the engine, disengage

all cutting tools and drives.

• Start or operate the start switch with

care and in accordance with the manu-

facturer’s instructions. Ensure sufcient

space between feet and the cutting

tool. Risk of injury.

• When starting or activating the engine,

do not tip the equipment unless the

equipment has to be lifted for this pro-

cedure. In this case, tip the equipment

only as far as is absolutely necessary

and lift only the side that is away from

the user.

• Do not start the engine when standing

in front of the ejection channel.

• Switch on the engine in accordance

with the instructions and only if your

feet are a safe distance away from the

cutting tools.

• Do not place hands or feet under rotat-

ing parts. Always keep away from the

ejection opening. A moment of care-

lessness when using the equipment

may result in serious injury.

• Do not leave or carry the equipment

when the engine is running.

• Switch off the engine, take out the

spark plug connector and ensure that

all moving parts are still:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Grizzly BRM 51-190 BSA Seite 81

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info