Bedienungsanleitung Grizzly EGT 1345 (Seite 83 von 128) (Deutsch, Holländisch, Französisch, Italienisch, Portugiesisch, Polnisch)

505473

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

manufacturer. Using foreign parts will im-

mediately lead to loss of guarantee.

Working with the tool:

Keepyourhandsandfeetaway

from the tines while working, es-

pecially when starting up the tool

– injury hazard!

• Observeanynoise-preventionregula-

tions and local by-laws. Using the tool

may be limited or prohibited on certain

days such as Sundays or public ho-

lidays, or during certain times of the

day (midday, at night) or in certain

areas (such as at health spas and

hospitals).

• Donotusethetooltochopupstones

or till lawn soil, as such use may dam-

age the tool.

• Donotusethetoolinrain,foul

weather or damp surroundings (such

as near garden ponds or swimming

pools). Only use in daylight or good

lighting conditions.

• Besensible.Donotusethetoolifyou

are tired or easily distracted, or after

the use of alcohol or medicines. Take

a break as soon as you need one.

•

Makesurethatyouarestandingrmly

when using the tool, especially on

slopes. If working on a slope, work along

the slope, not upwards or downwards.

Be particularly careful when changing di-

rection on the slope. Do not use the tool

on excessively steep slopes.

•

If there is any danger of slipping on

sloped ground, have a second person

secure the tool with a rod or cable. The

second person should stand up the

slope at a safe distance from the tool.

• Alwaysholdthetoolsecurelyinboth

hands while working with it.

• Makesurethatthegripsaredryand

clean. Be careful while moving back-

wards – danger of tripping over!

• Donotusethetoolifitisdamaged,

incomplete or altered without the ap-

proval of the manufacturer. In particu-

lar, do not work with the tool if guards

orprotectionttingsaredamagedor

missing.

• Donotoverloadthetool.Onlyworkin

the performance range stated. Do not

usetoolsthatdonothavesufcient

power for heavy jobs. Do not use the

tool for any use other than that intend-

ed by the manufacturer.

• Avoiddamagetothetool.Donotap-

ply extra weight and do not drag the

tool over hard surfaces such as tiles

or steps.

Stopping work:

Warning! The tines will continue

to turn for a few seconds after you

switch the tool off. Wait until they

have stopped moving – injury haz-

ard!

• Donotliftortransportthetoolwhile

the motor is running. Turn the tool off

and wait for the tines to stop moving,

then disconnect the tool from the

mains before changing the area you

are working on.

• Neverleavethetoolunattended

where you were using it.

• Switchthetooloff,waitforthetinesto

stop moving and disconnect the tool

from the mains under the following

circumstances:

- Always before leaving the tool.

- Before removing remnants of soil

and plants

- When the tool is not in use

- Before you conduct maintenance

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Grizzly EGT 1345 Seite 83

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info