Bedienungsanleitung Grizzly EKS 1835 QT (Seite 155 von 200) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Polnisch)

505393

155

Zoom out

Zoom in

Vorherige Seite

1/200

Nächste Seite

155

of the operating cycle are to be

considered, including, for example,

times during which the power tool

is turned off and times when the

tool is turned on but is running

idle).

Technical and optical changes can be car-

ried out in the course of further develop-

ment without notice. All dimensions, refer-

ences and information of this instruction

manual are therefore without guarantee.

Legal claims, which are made on the ba-

sis of the instruction manual, cannot thus

be considered as valid.

This device is designed for opera-

tion on a power supply network with

a system impedance Zmax at the

transfer point (domestic connection)

of a maximum of 0.170 Ohms.

The user must ensure that the device

is operated only on a power supply

network that fulls this requirement.

If necessary, the local power supply

company can be asked for the sys-

tem impedance.

Guarantee

This unit has a guarantee period of 36

months, or 12 months for units used on a

commercial basis or for replacement units

according to the statutory regulations.

Damages, which can be attributed to

natural wear, overloading or inappropriate

use, are excluded from the guarantee.

Certain component parts are subject to a

normal wear and are excluded from the

guarantee. In particular, these include:

Saw chain, chain bar, sprocket chain

wheel and carbon brushes, provided that

the complaints cannot be attributed to

aws in the materials themselves. Also,

all damage to the machine, the saw chain

and the chain bar, which can be attributed

to inadequate lubrication, are excluded

from the guarantee.

Furthermore, a condition of the guarantee

services is that the maintenance intervals,

indicated in the operating instruction, have

been adhered to and the instructions on

the cleaning, care and maintenance have

been followed. Damages, which originate

due to material or manufacturer faults, will

be repaired free of charge by replacement

delivery or repair. This is conditional upon

the device being returned in one piece

complete with proof of purchase and guar-

antee to our service centre..

Repair service

Our Service-Center will also carry out any

non-guarantee repair work for a charge.

We will be happy to give you a quote.

We will only work on units that have been

sent in with the appropriate packaging,

postage paid.

The transportation risk is borne by the

sender.

Caution: Please, in no case, send defec-

tive devices with lled oil tank. Completely

empty the tank. Possible material dam-

ages (oil runs out if device is placed on its

side or upside down!) and/or re damages

during transport are borne at the expense

of the sender.



-

cial freight - are not accepted.

We will dispose of tools free of charge..

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Grizzly EKS 1835 QT Seite 155

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info