Bedienungsanleitung Grizzly ERM 1030 G (Seite 41 von 120) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch)

505424

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

clean and clear. Remove cut material

only when the equipment is stopped.

• Do not leave the equipment unat-

tended in the workplace.

• Do not work with equipment that is dam-

aged, incomplete, or has been modied

without the authorisation of the manu-

facturer. Do not use the equipment with

damaged safety devices or screens or

with missing safety equipment such as

deection and/or grass collection de-

vices.

• Do not overload the equipment. Work

only within the specied power range

and do not change the regulator set-

tings on the motor. Do not use low-

powered machines for heavy work. Do

not use your equipment for purposes

other than those for which it is de-

signed.

• Do not use the equipment near

inammable liquids or gases. Non-

observance will result in a risk of re

or explosion.

• Do not lift or carry the equipment

when the motor is running.

• Switch off the equipment and discon-

nect the plug:

- Whenever you leave the machine,

- Before cleaning the ejection hole

or removing blockages,

- When the equipment is out of use,

- Before checking, cleaning or work-

ing on the equipment,

- If the power cable is damaged or

frayed,

- If the equipment has hit a foreign

object or if strange vibrations occur

during work. In this case, check the

equipment for damage and have it

repaired if applicable.

• Do not place feet or hands near or

under rotating parts. Do not stand in

front of the grass ejection hole during

sickle mowing.

Maintenance and Storage:

• Ensure that all nuts, bolts and screws

are tightened rmly and the equip-

ment is in safe working condition.

• Do not attempt to repair the equip-

ment yourself unless you have been

trained to do so. Any work not speci-

ed in these instructions is to be car-

ried out only by customer service

centres that we have authorised.

• Keep the equipment in a dry location

and out of reach of children.

• Handle the equipment with care. Keep

tools sharp and clean, in order to fa-

cilitate better and safer work. Follow

the maintenance instructions.

• Wear protective gloves when chang-

ing the cutting device.

• Regularly check the grass collection

device for wear and strains. For safety

reasons, replace worn or damaged

parts. When adjusting the blades, take

particular care to avoid ngers being

trapped between the rotating blades

and xed parts of the machine.

• Check that only replacement tools

authorised by the manufacturer are

used.

Electrical Safety:

• Ensure that the mains voltage match-

es the specications on the rating

plate.

• If possible, connect the equipment only

to a socked with a residual current-

operated protective device (RCD) with

a release current of more than 30 mA.

• Avoid bodily contact with earthed

parts (e.g. metal fences, metal posts).

• Use only authorised power cables of

type H05VV-F or H05RN-F, which are

no more than 75 m long and suitable for

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Grizzly ERM 1030 G Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info