Bedienungsanleitung Grizzly ERM 1637 G (Seite 22 von 144) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Polnisch)

505435

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

Maintenance and Storage:

When servicing the blades, re-

member that they can move even

if the power source is off.

• Ensure that all nuts, bolts and screws

are tightened rmly and the equip-

ment is in safe working condition.

• Check the mower for any damages.

• Repair damaged parts as appropriate.

• Do not attempt to repair the equip-

ment yourself unless you have been

trained to do so. Any work not speci-

ed in these instructions is to be car-

ried out only by customer service

centres that we have authorised.

• Keep the equipment in a dry location

and out of reach of children.

• Handle the equipment with care. Keep

tools sharp and clean, in order to fa-

cilitate better and safer work. Follow

the maintenance instructions.

• Wear protective gloves when chang-

ing the cutting device.

• Regularly check the grass collection

device for wear and strains. For safety

reasons, replace worn or damaged

parts. When adjusting the blades, take

particular care to avoid ngers being

trapped between the rotating blades

and xed parts of the machine.

• Check that only replacement tools

authorised by the manufacturer are

used.

Electrical Safety:

• Ensure that the mains voltage matches

the specications on the rating plate.

• If possible, connect the equipment only

to a socked with a residual current-

operated protective device (RCD) with

a release current of more than 30 mA.

• Avoid bodily contact with earthed

parts (e.g. metal fences, metal posts).

• Use only authorised power cables of

type H05VV-F or H05RN-F, which are

no more than 75 m long and suitable

for outdoor use. The power cable

wire cross section must be at least

2.5 mm

. Always completely unroll

cable drums before use. Check the

cable for damage.

• To x on the power cable, use the

cable suspension intended for the pur-

pose.

• Keep the power cable away from the

cutting tool when working. The cutting

blades may damage the power cable

and result in contact with live parts. Al-

ways run the power cable behind the

operator.

• Do not use the power cable to pull

the plug from the socket. Protect the

power cable from heat, oil and sharp

edges.

• Switch off the equipment and discon-

nect the plug from the socket if the

power cable is damaged. If the power

cable is damaged, it must be replaced

by the manufacturer, the customer

services of the same, or a qualied

person, in order to avoid hazards.

• Do not connect a damaged power

cable to the mains. Do not touch

a damaged power cable when it is

connected to the mains. A damaged

power cable may result in contact with

live parts.

General Description

Function Description

The electric lawnmower has a cutting tool,

which turns parallel to the cutting level.

It features a powerful electrical drive, a

sturdy plastic casing, a safety switch, a

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Grizzly ERM 1637 G Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info