Bedienungsanleitung Grohe Crometta (Seite 2 von 40) (Deutsch, Englisch)

626602

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

guarantee claims.

• The wall bar must be mounted stress relieved!

• Optimal functioning is only guaranteed with the com-

bination of Hansgrohe hand showers and Hansgrohe

shower hoses.

Technical Data

Operating pressure: max. 0,6 MPa

Recommended operating pressure: 0,1 - 0,4 MPa

(1 MPa = 10 bar = 147 PSI)

Hot water temperature: max. 60°C

Thermal disinfection: max. 70°C / 4 min

The product is exclusively designed for drinking water!

Assembly see page 4

Cleaning (see page 32) und beilieg-

ende Broschüre

Operation (see page 28)

Flow diagram

(see page 15)

Dimensions (see page 15)

With the excentric washer it is possible to

equalize tolerance of the drilling.

(see page 7 / 8 / 10)

Do not use silicone containing acetic acid!

Symbol description



Safety Notes

 Gloves should be worn during installation to prevent

crushing and cutting injuries.

 Children as well as adults with physical, mental and/

or sensoric impairments must not use this shower

system without proper supervision. Persons under

the inﬂuence of alcohol or drugs are prohibited from

using this shower system.

 Do not allow the streams of the shower touch sensi-

tive body parts (such as your eyes). An adequate

distance must be kept between the shower and you.

 The product may not be used as a holding handle. A

separate handle must be installed.

 The shower system may only be used for bathing,

hygienic and body cleaning purposes.

 Shower hoses are only suitable for a connection

from the shower to the ﬁtting. Never ﬁt a shut-oﬀ

device between the ﬁtting and the hose.

 For safety reasons, it is forbidden to remove the

EcoSmart (ﬂow limiter) installed in the shower

#28561000.

Installation Instructions

• Prior to installation, inspect the product for transport

damages. After it has been installed, no transport or

surface damage will be honoured.

• The pipes and the ﬁxture must be installed, ﬂushed

and tested as per the applicable standards.

• The plumbing codes applicable in the respective

countries must be oberserved.

• The installation must be compliant with the AS 3500.

• Where the contractor mounts the product, he should

ensure that the entire area of the wall to which the

mounting plate is to be ﬁtted, is ﬂat (no projecting

joints or tiles sticking out), that the structure of the wall

is suitable for the installation of the product and has

no weak points. The enclosed screws and dowels are

only suitable for concrete. For another wall construc-

tions the manufacturer's indications of the dowel

manufacturer have to be taken into account.

• The mesh washer must be insert to protect the over-

head shower against incoming dirt by pipework. In-

coming dirt leads to defects or/and can damage parts

of the shower; such caused faults voids all liability and

English

Spare parts (see page 33)

Special accessories (order as an extra)

tile-matching-disk chrome plated #97450000

tile-matching-disk chrome plated #96186000

tile-matching-disk chrome plated #97986000

tile-matching-disk chrome plated #28697000

tile-matching-disk chrome plated #98993000

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Grohe Crometta Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info