Bedienungsanleitung Ground zero GZCR 755MON (Seite 33 von 42) (Deutsch)

505523

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

GROUND ZERO

Menu settings level 2

You can reach menu level 2 by pressing the volume control dial on the device or SEL button on remote

control for approx. two seconds. The individual menu items can be reached by repeatedly pressing these

buttons. At menu level 2, the functions “LOC”, “LOUD”, “ST-MO”, “CT”, “TAVOL”, “EON”, “D/Z”, “BTVOL”,

can be set. Turning the volume control dial on the device or press VOL +/- buttons on remote control to

set these menus.

LOC function to set the station search

The “LOCAL” function is relevant for the station search. Here it can be selected whether only local, strong

stations (“ON”) or also weaker, more distant stations (“OFF”) are searched for. (Note: This setting only

affects the radio mode and can only be carried out while the radio mode is active.)

LOUD function for the tone setting – loudness

The “LOUD” function makes it possible to emphasize low and high frequencies through the push of a

button in order to increase sound perception in an adjustment to the respective volume.

ST – MO function to switch between stereo and mono playback

This menu item gives you the option of selecting between stereo and mono playback.

CT function to set the time of day

Turning the volume control dial on the device to the right/left or press VOL+/- button on remote control

to change the number of the hours/minutes.

(Note: If the device receives an RDS station with an RDS time signal, the clock will be automatically

updated in particular intervals.)

TAVOL function to set the volume for traffic announcements

The “TAVOL” function enables an adjustment of the volume of traffic announcements according to

individual preferences.

EON for the automatic station switch for traffic announcements

The “EON” function is an additional RDS service. If the current program doesn’t offer any traffic

announcements, EON automatically switches to the traffic announcements on another program. After the

end of the announcement, the device switches back to the previously heard station. The readiness for

traffic announcements “TA” has to be activated for this.

D/Z for the settings of the second playback level (DUAL ZONE)

The device has a second playback level (dual zone). This makes it possible to address a second playback

medium. For example: listening to the radio on the front seats and watching a DVD on the back seats

(this requires a second monitor). Several combination options are available here.

BT VOL function to set the volume for Hands free communication

The “BT VOL” function enables an adjustment of the volume of the Bluetooth Hands Free communication

according to individual preferences.

GROUND ZERO

Radio Mode Operations

Selection of the radio station

Turn on the device with the on/off button. If the device was turned off while it was in RADIO mode, the

last selected station will be heard. If the device is set to an operation with one of the different data

carriers, please press the “MODE” button until you get to the radio function.

Radio Display with open monitor

Radio display with open monitor

with activated Dual Zone

Selection of the wavelength range

Briefly press the “BAND” button repeatedly to switch to FM 1, FM 2, FM 3, or MW 1, MW 2.

Auto searching for a radio station with the scanner

To set the stations, select the desired wave band with the “BAND” button. In order to begin searching in

the desired direction, long press the Tune Up or Tune down button or the Left or Right arrow of the

Remote Control for at least 2 seconds. The buttons  and  on the on-screen keyboard are also

available to change the frequency.

Manual search for a radio station

In order to select a station manually, short press the Tune Up or Tune down button or the Left or Right

arrow of the Remote Control. The buttons  and  on the on-screen keyboard are also available to

change the frequency.

Storing a station with the station buttons

- Select a band (if needed)

- Auto/Manual search for a station

- Hold a station button (M1-M6) on the on-screen keyboard or digit (1-6) button on remote control for at

least 2 seconds to store the searched station to it.

Storing stations with automatic station search

The automatic station search scans for the strongest available stations and stores these under the station

selection buttons “1” - “6”. In order to start the search, press the “P.SCAN” button and keep it pressed

for more than two seconds. After the scanning has ended, the stored stations are automatically matched

up with their station names and the station stored at the station position “1” can be heard. Now the

device will briefly scan all stored stations for about 5 seconds.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ground zero GZCR 755MON Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info