Bedienungsanleitung Grouw 17937 (Seite 132 von 165) (Deutsch, Englisch, Dänisch, Schwedisch, Norwegisch, Finnisch)

788793

132

Zoom out

Zoom in

Vorherige Seite

1/165

Nächste Seite

Installation

You can nd installation videos and tips at www.grouw.

dk.

The robot lawnmower’s operation

The robot lawnmower’s work area must be surrounded

by the boundary wire, which must form a continuous

loop around the area to be mowed.

The robot lawnmower runs in a random pattern within

the work area and changes direction whenever it

detects the boundary with its sensors, and each time it

encounters an immovable obstruction. This ensures that

the entire lawn is cut without leaving a pattern of wheel

tracks on it.

Once the robot lawnmower has registered the boundary

wire X times, it moves a few metres away from the most

recent registration point and runs around in a spiral

trajectory to improve its coverage of the lawn.

When the robot lawnmower needs charging, it

automatically follows the boundary wire back to the

charging station.

Planning

It is important that you carefully consider how the

boundary wire is laid out so that you encircle all the

obstacles such as beds, terraces, trampolines, shrubs

and trees, ponds and paths in your garden.

We recommend that you make a sketch of your garden

and mark the location of the charging station and the

boundary wire before you start laying it out.

If you follow the instructions above and take the time

required, it is not dicult to lay out the boundary wire.

Note! If your neighbour has a similar robot

lawnmower, there must be a clearance of at least

160 cm in all directions between your neighbour’s

boundary wire and your own! If your neighbour has a

robot lawnmower of a dierent make, you may need

an even greater distance, as the frequency in the

boundary wires are dierent.

Step 1: Installing the charging station

First nd out where in the garden the charging station

should be placed.

• Theinstallationpointmustbeclosetoanoutdoor

electrical socket that the charging station can be

connected to.

• Theinstallationpointmustbenexttothelawn.The

boundary wire that runs from the charging station

must be fed under the charging station so that its

end returns to the rear of the charging station. The

other end of the boundary wire must be fed to the

rear of the charging station.

• Theinstallationpointmustbeatanddryandthere

must be no obstructions 2 metres in front of the

charging station and 1 metre behind it. The charging

station should not be placed in a corner, as there

is a risk that the robot lawnmower will get stuck

between the corner and the charging station.

• Theinstallationpointmustbeintheshademost

of the day, as it is best not to charge the robot

lawnmower’s battery in direct sunlight where the

temperature may get too high. If necessary, purchase

a garage for the robot lawnmower so that it has

some cover when it is not cutting the grass.

• Theinstallationpointmustbefreeofantnestsand

the like to prevent insects getting into the charging

station.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Grouw 17937 Seite 132

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info