Bedienungsanleitung Grundig 40 VLE 8270 WL (Seite 14 von 83) (Englisch)

545183

Zoom out

Zoom in

Vorherige Seite

1/83

Nächste Seite

ENGLISH

SETTINGS

-----------------------------------------------------------------------------------------------------------------------------------------

Initial set-up and tuning

television channels

The television set is equipped with automatic

channel search, which searches for satellite

channels (DVB-S), terrestrial channels (DVB-T),

cable channels (DVB-C) and analogue channels.

You start the search and the television channels

will be stored into the Program Table. Following,

you can sort the television channels in the Pro-

gram Table.

For DVB-S channels there are 6000 presets

available, for DVB-T and DVB-C channels 1000

presets, and 99 presets for analogue channels.

The various settings

Depending on the type of antenna connected,

you can decide which channels you would like

the television to search for.

Tunes digital television channels from the satel-

lite, from page 15.

You have two options for this search:

–

the basic installation which presets a stand-

ard selection, e.g. the satellite Astra 19.2°

East; you need only start the search;

–

the professional installation, which allows

you to make all required settings and set pa-

rameters for your receiver system.

Tunes digital terrestrial television channels, on

page 17.

Tunes digital television channels from the

cable provider, on page 17.

Tunes analogue television channels, in the

chapter “Special functions”, starting on

page 76.

Further settings for digital television chan-

nels after the initial set-up can also be found

in the chapter “Special Settings”, starting on

page 69.

Note:

Make the language and country selection for

all types, then continue reading the respective

chapter.

Selecting language, country and

operating mode

1 Switch on the television set from standby with

8«, »1…0« or »P+« or »P-«.

–

During initial set-up, the »Installation Guide«

will be displayed.

Help:

If this menu is not displayed, restore the

television set to its default settings (see

page 59).

2 Select the menu language with »

«, »

«,

« or »

« and press

»OK«

to confirm.

3 Select the mode with »

« or »

« and press

»OK«

to confirm.

– The settings used in »Home Mode« help to

save energy.

–

Alternatively, the menu item »Shop Mode«

can be selected which the retailer can use

for demonstrating the device functions.

Note:

End the »Shop Mode« by restoring the televi-

sion set to its default settings (see page 59).

4 Select the country in which the television set

is operated with »

«, »

« or »

« and

press

»OK«

to confirm.

– The »Source Setup« menu appears with the

»Connection Type« line marked.

Note:

You can find a description of how to tune

the television channel of your choice – de-

pending on the antenna connected – in the

following chapters.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Grundig 40 VLE 8270 WL Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Grundig 40 VLE 8270 WL

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info