10
CONNECTION AND PREPARATION
_______________
Connecting the aerial and the mains cables
1 Connect the cable from the house aerial with the aerial input of your TV set.
2 Connect the mains cable with a wall outlet.
Connecting the surround loudspeakers
1 Connect the surround loudspeakers supplied with the »SURROUND«
terminals.
To insert the loudspeaker cables, press down the clamping levers. Insert the
»–« core of the loudspeaker cable into the black (–) terminal and the »+« core
(marked or coloured core) into the red terminal.
Note:
If surround loudspeakers are connected, this configuration must be selected
in the »S« menu under the point »Surround settings« (see chapter Dolby
Surround ProLogic).
If several loudspeakers are connected to the »SURROUND« terminal, the
total nominal impedance is not allowed to fall below 8 Ohm.
Connecting an active subwoofer
1 Connect the subwoofer to the »WOOFER« terminal.
2 Slide the »EXT INT« switch to the »EXT« position.
– The internal subwoofer is switched off.
EXT. INT.
olby Laboratories. “Dolby”, “Pro Logic” and the
Dolby Laboratories. Confidential Unpublished
ries, Inc. All right reserved.
Works. ©1992-1997 Dol
