ENGLISH
41
INFORMATION
__________________________________________________________________________
Rectifying minor problems
Not every kind of sound interference is caused by a defect in your HiFi system. Impairment
can also be caused by leads having been accidentally pulled out, damaged CDs and worn
out batteries in the remote control. If the following measures do not bring about satisfac-
tory results, consult an authorised dealer.
Fault
No sound.
The system does not respond when
buttons are pressed.
The remote control does not work.
Poor radio reception.
Tracks on a CD are skipped.
CD-Rs or CD-RWs are not being
played back, or being played back
incorrectly.
Possible cause/remedy
The volume setting is too low – increase the volume.
The headphones are plugged in – disconnect the head-
phones.
The power cord is incorrectly connected. Connect it
properly.
Mute is activated.
Static electrical discharge. Switch off the device – discon-
nect the power cable and plug it in again after a few
seconds. Press the »RESET« button.
The batteries are flat – replace the batteries.
The remote control is out of range of the stereo.
Weak antenna signal – check the antenna.
Interference from electrical devices such as televisions,
video recorders, computers, neon lamps, thermostats or
motors. Keep the stereo away from such devices.
The CD is damaged or dirty – replace the CD or clean it.
The PROGRAM (track memory) or RANDOM functions
are active. Deactivate the functions.
For MP3 CDs: the alphanumeric sorting has not been
taken into account. See page 26.
Faulty software or hardware settings for burning, or the
CD being used is faulty.
Check the components of your CD burner/burner
software or change the CD you are using.
Technical and design modifications reserved.
