Bedienungsanleitung Grundig DSB 980 (Seite 37 von 110) (Deutsch, Englisch, Französisch, Spanisch, Polnisch)

755935

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

ENGLISH

•You can also choose to keep the network

connected by using the “Keep network

connected” option in the network settings menu.

•In the standby mode, the Wi-Fi signal indicator

is displayed with or without a cross through it

according to the chosen network settings.

•You will then need to set “Keep network

connected”option.

•Choose < YES > to activate this function (if you

will use the UNDOK app for remote control) or

choose < NO > to deactivate this function.

•The Soundbar will then start scanning for

available Wi-Fi networks.

•Display: < Network wizard Scanning / > will

appear. After completed

•Display: < SSID > list will appear for selection.

•After network wizard scan is completed, the

name of your wireless network (SSID) will appear

on the screen together with all other available

networks (SSID List).

•Highlight the name of your wireless network in

the SSID list by scrolling up or down and go to

the next steps to make required inputs.

Note:

•If your Wi-Fi network is not found in SSID list;

-then device may be too far from your Wi-Fi router.

Or;

-you may need to switch on your wireless router

(please see the instructions supplied with it).Or;

-it may be because the router is configured not

to broadcast the SSID. You should then select the

< Manual config > option in order to enter the

network details manually.

WI-FI NETWORK-FIRST INSTALLATION ___________

-If your network name is being broadcast, and it

was not found, then try selecting the < Rescan>

option to scan again or try moving your Soundbar

closer to your Wi-Fi router.

WPS (Optional)

Note:

•WPS (Wi-Fi Protected Setup) encrypted networks

are identified by “[WPS]” shown in front of the

SSID, and have two methods of connection.

Select one and follow the prompts. When using

the Network wizard an additional option < Skip

WPS > is available.

< Push Button >

•If you select this option, the Soundbar prompts

you to press the connect button on the router

and then press the [ ] button.

< PIN >

•If you select the option < PIN >, the Soundbar

generates an 8-digit code number which you

should enter into the wireless router using

a web browser (refer to your router’s user

documentation). You should then press the[ ]

button.

< Skip WPS>

•Select < Skip WPS > to skip WPS setup and

go directly to the < Key > menu to enter the

network password when your Wi-Fi router is

a standard encrypted network that does not

support WPS.

Key (Password)

•After your Wi-Fi network is found by the device,

the »Password entry« screen will appear.

•if your network is using one of the encryption

systems: WEP, WPA/WPA2. You will need to enter

the correct encryption key (password) into the

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Grundig DSB 980 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info