32
Displaying station reception properties
1 In the main menu, select »Installation« with »P-« or »P+« and
press »OK« to confirm.
2 Select »Info« with »P-« or »P+« and press »OK« to confirm.
3 Select »Reception parameters« with »P-« or »P+« and press
»OK« to confirm.
– The »Reception parameters« menu appears.
4 In the »Reception parameters« menu, press »P-« or »P+« to
change stations.
Notes:
The lower section of the menu shows the signal properties. The
lower the number of »Bit error« displayed (the optimum value is
»0«), and the further the »Signal level« bar extends to the right,
the better the reception signal.
The signal level not only depends on the settings of your
receiver unit, but also on the channel which is currently active.
Remember this when aligning your antenna using the signal
level display.
5 Press »i« to quit the menu.
Displaying device information
1 In the main menu, select »Installation« with »P-« or »P+« and
press »OK« to confirm.
2 Select »Info« with »P-« or »P+« and press »OK« to confirm.
3 Select »System information« with »P-« or »P+« and press
»OK« to confirm.
– It contains information on the product designation, the hard-
ware version and the software version.
4 Press »i« to quit the menu.
Connecting the digital receiver to a PC
The »RS 232« serial interface allows you to connect to a PC.
To do this, you need a serial cable with a 1:1 assignment, i.e. all the
pins are directly connected. Depending on the PC, the cable needs
either a 9- or a 15-pin D-SUB socket, and a 9-pin D-SUB plug for
connection to the receiver.
You can use this connection for software updates and for uploading
and downloading other data.
You can find more information on the internet at www.grundig.com.
INFORMATION_____________________________________
System Info
Manufacturer: GRUNDIG
Hardware: V. 0100
Software: V. 0104
Remote control: TP 765S
Internet: http://www.grundig.com
Back Exit
DSR 2410
Reception parameters
Frequency: 12480 MHz
Symbol rate: 27500 kS
Polarisation: Vertikal
Bit error: 0
Reception: ok
S/N: 13 dB
Signal level: 254
Station Back Exit
select
7SAT.1
■■■■■■■■
■■■■■■■■■■■■■■■■■■■■■■■■
