3030
INFORMATION
___________________________________________
Troubleshooting
If a fault occurs, first refer to this information before you take the digital
receiver for repair.
If you are unable to rectify the fault using the information given here, contact
your local dealer or service specialist.
Under no circumstances should you attempt to repair the digital receiver
yourself, as this will invalidate the guarantee.
PROBLEM
No function, mode
indicator not lit
No picture
No sound
Message
»No signal«
The remote control
does not work
The time is not cor-
rectly displayed
You have forgotten
your personal access
code for the station
lock and the system
settings
POSSIBLE CAUSE
Power cord incorrectly
connected
Euro-AV (Scart) cable not prop-
erly connected, incorrect set-
tings in the »Settings« menu
The sound is muted, the
Euro-AV cable is incorrectly
connected or the receiver
volume is set to low
The antenna is not correctly
connected
No batteries are inserted,
or they are low, or the remote
control is not directed at the
infrared sensor
Deviation from local time
REMEDY
Connect the power cord
correctly
Connect the Euro-AV cable
correctly, correct the menu
settings
Switch on the sound,
connect the Euro-AV cable
correctly, turn up the
volume
Connect the antenna
correctly
Insert the batteries correctly,
put in new batteries, point
the remote control at the
infrared sensor
Correct the difference
Enter the master code
»470057«
