ENGLISH
49
INFORMATION
___________________________________________
Troubleshooting
If a fault occurs, first refer to this information before you take the digital
receiver for repair.
If you are unable to rectify the fault using the information given here, contact
your local dealer or service specialist.
Under no circumstances should you attempt to repair the digital receiver
yourself, as this will invalidate the guarantee.
PROBLEM
No function, mode
indicator not lit
No picture
No sound
No picture or sound
on certain stations
Message »Faulty
signal«
The remote control
does not work
The time is not cor-
rectly displayed
POSSIBLE CAUSE
Power cord incorrectly
connected
Euro-AV (Scart) cable not
properly connected, incorrect
settings in the »TV Output«
menu
The sound is muted, the
Euro-AV cable is incorrectly
connected or the receiver
volume is set to low
The station does not broadcast
all day.
The antenna is not properly
connected or positioned
No batteries are inserted, or
they are low, or the remote
control is not directed at the
infrared sensor
Deviation from local time
REMEDY
Connect the power cord
correctly
Connect the Euro-AV cable
correctly, correct the menu
settings
Switch on the sound,
connect the Euro-AV cable
correctly, turn up the
volume
Find out about the broad-
casting times or try the
station again at a different
time.
Connect the antenna
correctly. Move the antenna
around to find the best
position
Insert the batteries correct-
ly, put in new batteries,
point the remote control at
the infrared sensor
Correct the deviation
(see page 17)
