ENGLISH
43
ADJUSTING THE SATELLITE RECEIVER
___________________________________
7 Select the »Power« row using the »
..
« button then switch the LNB power
supply on or off using the »
;; ::
« buttons.
Note
If you wish to receive the programmes from more than 2 satellites (e.g.
ASTRA and EUTELSAT-HotBird ), you may select with which DiSEqC signal
the switching between the satellite antennas or the LNBs is to be effected.
For
this, refer to the chapter »The LNB Configurations« on page 40.
8 Select the »DiSEqC« row using the »
..
« button then select the appropriate
DiSEqC signal depending on the satellite antenna and LNBs used.
Select »DiSEqC #1 or »DiSEqC #2« using the »
;; ::
« buttons.
Important!
The parameters of the »Antenna Setup« menu are not documented and shall
not be changed.
9 Press the »
i
« or »TXT
ķ
« button to exit the menu.
– The changes made are automatically saved.
LNB Configuration
Select DiSEqC port number.
[TXT]-Previous
Astra 019.2°E
10,600 GHzL.O. High
9,750 GHzL.O. Low
ONPower
Auto0/22KHz
ľ
#1
ı
DiSEqC
Antenna Setup DiSEqC 1.2
Astra
ľ
✔
ı
HotBird ✔
EutelSat 10E
EutelSat 16E
TurkSat 42E
Telecom 5W
Telecom 8W
USER1
