613424
5
Zoom out
Zoom in
Vorherige Seite
1/78
Nächste Seite
4. Installation
Do not install in a location subject to high temperature (over 50°C), low temperature (below -10°C), or high
humidity. Doing so may cause fire or electric shock. Keep out of direct sunlight and heat radiation sources. It may
cause fire. Avoid aiming the camera directly towards extremely bright objects such as sun, as this may damage
the CCD image sensor.
Do not install the unit in humid, dusty, or sooty locations. Doing so may cause fire or electric shock. Install it in a
place with good ventilation.
When installing the camera, fasten it securely and firmly. A falling camera may cause personal injury.
If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall it.
4.1. Camera Overview
1. LINE OUT & LINE IN / MIC IN: Two-way audio transmission
2. Power LED: Green light indicates good power connection.
3. Reset button: Press and hold the button for 5 seconds, and then the camera will reset to factory defaults.
After around 30 seconds, reconnect the camera by entering its default IP address: 192.168.1.1, in the URL bar.
4. AUTO IRIS connector: Auto iris lens connector
5. NETWORK (with PoE) Connector: RJ45 connector for LAN connection
6. Network LEDs: Green Link Light indicates good network connection. Orange Activity Light flashes for network
activity indication.
7. I/O Terminal Connector: For alarm connection
8. VIDEO (BNC connector): For video output
9. Micro SD Card slot: For video and snapshots storage
10. For GCI-H0602B: 12V connector / For GCI-K0503B and GCI-H0503B: AC 24V/DC 12V Connector (Please refer
to the table below for wiring of the AC 24V and DC 12V camera with the supplied power cable).
4.2. System Requirements
To perform the IP Camera via web browser, please ensure your PC is in good network connection, and meets the
system requirements as described below.
Personal Computer :
1.) Intel Pentium M, 2.16 GHz or Intel Core 2 Duo, 2.0 GHz
2.) 2 GB RAM or more
Operating System :
Windows VISTA or Windows XP
3
English
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Grundig GCI-H0602B wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info