Bedienungsanleitung Grundig GNFP3450 (Seite 34 von 49) (Englisch)

773748

Zoom out

Zoom in

Vorherige Seite

1/49

Nächste Seite

34/EN

Interior Illumination

(Depends on the Model)

In suitable models there is a lamp

illuminating the inside of your machine

when the door is opened.

1. Press the On/Off key and P2 program

key simultaneously for 3 seconds and

enter the Settings menu after turning

your machine on with On/Off key,

depending on the model you may enter

the Settings Menu by pressing the P3

key for 3 seconds.

2. Move to “L:” position on the screen

by pressing the P2 key . Select the

desired position with P3 program

key. Interior illumination feature is off

in “L:0” position and active in “L:1”

position.

Doormatic

(Depends on the Model)

Thanks to the “Doormatic” feature on your

machine, the drying effectiveness of your

machine is improved and power is saved.

There are two options, namely “OFF” and

“ON”.

You may use sub-menu settings to change

“Doormatic” settings.

When you activate this function, the door

of your machine is opened automatically at

the end of the washing cycle.

Doormatic feature opens the door at

the end of the washing cycle thanks

to the “door opening shafts". This

process takes about 2 minutes. Do not

force to close the door if the power is

interrupted while the shafts are moving

out. Operation shall be completed

and shafts shall be retracted when the

power is restored.

Doormatic function may cause

changes to the cycle time.

Hygiene Care function

(depends on the model)

Designed to be used when more hygiene

is required for washing the dishes. This

function increases the washing and rinsing

temperatures in the selected cycle and

extends the periods of these steps in the

cycle. Moreover, an additional rinsing cycle

is performed to wash and rinse your dishes

with more hygiene.

To enable Doormatic Function:

1. When the door is closed, to enable

Doormatic

function, press and

hold the F3 and F4 function keys

simultaneously.

Doormatic

indicator turns on and Auto

Door Opening function is enabled.

Doormatic

function could be enabled

or deactivated in Program Selection mode.

To cancel Doormatic Function :

1. When the door is closed, to disable

Doormatic

function, press and

hold the F3 and F4 function keys

simultaneously.

Doormatic

indicator turns off and the

function is disabled.

TrayMaster Function

(depends on the model)

Select Intensive 70°C programme and

press function key to run this function.

3. To save, exit the settings menu by

pressing on/off key of your machine

for 3 seconds. Your settings shall be

saved automatically.

Floor illumination

Warning to show that machine is in

washing phase

(depends on the model)

Your machine reflects a light to the floor

during the washing process. This light turns

off after the washing process is complete.

Floor illumination is activated

automatically when the washing

programme starts and remains lit until

the end of the programme.

Floor illumination cannot be cancelled

by the user.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Grundig GNFP3450 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info