Bedienungsanleitung Grundig GRB 2000 USB (Seite 24 von 31) (Deutsch, Englisch)

755990

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

ENGLISH

The device is suitable for music CDs

displaying the logo shown here (CD-

DA) and for CD-Rs and CD-RWs with

audio data.

When burning CD-R and CD-RWs

with audio files, various problems may arise which

could lead to interference in playback. This can be

caused by faulty software or hardware settings or by

the CD being used. Should such problems arise, con-

tact the customer services of your CD burner or soft-

ware manufacturer or look for relevant information, for

example on the Internet. When you are making audio

CDs, observe all legal guidelines and ensure that the

Always keep the CD compartment closed to prevent

dust from collecting on the laser optics. Do not attach

adhesive labels to CDs. Keep the surfaces of CDs

clean. You can play standard 12 cm CDs as well as 8

cm CDs on your device. An adapter is not necessary.

Selecting the CD input source

1 Move the »OFF CD USB RADIO« switch to the

»CD« position.

2 Press »OPEN/CLOSE« to open the CD compart-

ment.

3 Insert a CD in the compartment with its label facing

upwards.

4 Press »OPEN/CLOSE« to close the lid of the CD

compartment.

– The device reads the content of the CD.

The total number of tracks appears in the

display.

CD playback

1 Press »eII« to start playback.

– Playback begins with the first track.

– Display: the current track number.

– Playback stops at the end of the CD.

2 Press »eII« to pause playback pause.

3 Press »eII« to resume playback.

4 Press »■ MONO/ST.« to end playback.

5 Press »OPEN/CLOSE« to open the CD compartt-

ment and take out the CD.

6 Close the CD compartment.

CD MODE ________________________________________________________________

Repeating the current track

1 Press »DOWN « briefly during playback.

– The track is repeated from the beginning.

Selecting another track

1 During playback, keep pressing »DOWN « or

»UP « until the number of the track you want to

hear appears in the display.

– Playback of the selected track starts automatically.

Note:

You can also select tracks in the stop position.

However, you must then start playback of the track

with »eII«.

In stop mode you can press and hold down

»DOWN « or »UP « to select tracks more

quickly.

Searching for a passage within a

track

1 During playback, press »DOWN « or »UP «

and hold it down until you find the passage you want

to hear.

– Playback starts when you release »DOWN «

or »UP «.

Note:

During the search the volume is reduced.

Repeating a track (Repeat One)

1 During playback, press »MODE« once.

– The current track is repeated.

2 To terminate the function, press »MODE« twice.

Repeating all tracks (Repeat All)

1 During playback press »MODE« twice.

– The whole CD is played back repeatedly.

2 To terminate the function, press »MODE« once.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Grundig GRB 2000 USB Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info