Bedienungsanleitung Grundig GSB 200 NFC (Seite 6 von 11) (Englisch)

570175

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

ENGLISH

CONNECTION AND PREPARATION

-----------------------------------

Connecting the power adapter

Note:

Check that the mains voltage on the type

plate on the power adapter corresponds to

your local mains supply.

If this is not the case, contact your specialist

dealer.

1 Connect the single plug of the power adapter

into the »DC IN 5V« socket.

2 Connect the power adapter into the wall socket.

Caution:

The device is connected to the mains with

the power cord. Pull out the power adapter

if you want to completely disconnect the de-

vice from the mains.

Make sure the power adapter is easily ac-

cessible during operation and not hindered

by other objects.

Charging the device

1 The power adapter to the device will automat-

ic recharge the internal rechargeable battery.

– The display lights up orange during the

charging process and goes out once the

battery is charged.

Notes:

Charging takes up to approx. 6 hours.

If the device is switched on and not con-

nected to the mains via the mains adapter,

the display indicates when the battery is dis-

charged (flashes red).

Using and maintaining your

rechargeable battery

The battery must be charged approx. 6

hours prior to first use.

For long period of storage, please recharge

the battery at least once every two months

to maintain the battery in optimum condi-

tion.

Once the battery is fully discharged, imme-

diately recharge regardless of whether you

plan to use the battery or not in order to

maximize battery life.

Recharge efficiency will degrade when envi-

ronmental temperatures drop below 5°C or

exceed 35°C.

Warning:

Do not expose the battery to temperatures in

excess of 45C.

Connecting external devices

Note:

Switch the device off before you connect

external devices.

1 Use a standard audio adapter to connect the

audio outputs of the external device to the

»AUX IN« (ø 3.5 mm) socket.

Notes:

The GBS 200 will auto-switch into AUX IN

mode from Bluetooth mode after insert AUX

IN cable to the device.

If want to back to Bluetooth mode, please

remove AUX IN cable from the »AUX IN«

socket.

Charging a Bluetooth/USB De-

vice

Your GSB 200 include a USB port at the back.

This allow you to charge a Bluetooth/USB

Device using the GSB 200.

1 Connect your Bluetooth/USB using the USB

cable into the »

5V 500mA

« socket.

– The Bluetooth/USB Device will begin to

charge.

Notes:

The GSB 200 switches off automatically af-

ter approx. 30 minutes.

Power output of the USB port is 500 mA.

If your device require more power may not

charge through this USB port.

Charging function may not be support for all

smartphones, tablets or electronic devices.

Caution:

To ensure the device is splashproof, close

the rubber cover of the sockets tightly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Grundig GSB 200 NFC Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Grundig GSB 200 NFC

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info