Bedienungsanleitung Grundig GSB 910 SW (Seite 17 von 82) (Deutsch, Englisch, Französisch, Italienisch, Spanisch, Polnisch, Türkisch, Norwegisch, Finnisch)

755934

Zoom out

Zoom in

Vorherige Seite

1/82

Nächste Seite

ENGLISH

Preparation

Activate the remote control battery

1 Remove protection film from the battery com-

partment.

– The remote control is now functional.

Change remote control batteries

(TYPE AAA)

Note:

If your device no longer responds to the

remote control commands, the battery may

be dead. It is imperative that dead batteries

be removed. We do not assume liability for

damage caused by leaked batteries.

Caution:

Danger of explosion if battery is incorrectly

replaced. Replace only with the same or

equivalent type.

1 Hold the remote control with the back side fac-

ing up.

2 Push the detent of the battery holder to the right

and remove battery holder.

3 Remove used battery and insert new battery

into the battery holder, positive pole facing up-

ward.

4 Push battery holder into the remote control until

it clicks into place.

Connecting

Connect Soundbar to the LCD TV

1 Connect a standard audio lead to the

»AUX INPUT« jacks of the Soundbar.

– Please be aware of the left and right chan-

nels when doing so (white = left channel,

red = right channel).

2 Connect audio lead to the audio output jacks

of the LCD TV.

Connect external device

An external device, such as a MP3-Player for ex-

ample, can be connected to the »AUX IN« jack.

1 Connect a standard audio lead to the

»AUX IN« jack of the Soundbar.

PREPARATION/CONNECTION ----------------------------------------------------------

2 Connect adapter cable to the external device.

Note:

The LCD TV can also be connected via the

»AUX IN« jack if it is not equipped with au-

dio output jacks. In such cases please use the

headphone jack.

Connect mains cable

Check that the mains voltage indicated on the

type label (on the back of the device) corre-

sponds to the local mains voltage. If this is not the

case, please consult your specialist dealer.

1 Plug mains cable plug into the socket

(100 - 240V~ 50/60Hz).

Caution:

The Soundbar is connected to the mains via

the mains cable. If you want to disconnect

the Soundbar from the mains completely,

you must pull the mains plug.

Please ensure that the mains cable is freely

accessible during operation and is not ob-

structed by any other objects.

Subwoofer Connection

1 Make sure the AC power cord is connected to

a power supply securely.

2 Subwoofer have the wireless bluetooth to

receive the audio signal from the sound bar.

When the blue indicator flashing, the subwoof-

er is in searching bluetooth signal status, the

blue indicator keeps lighting means bluetooth

was connected, if the subwoofer can not con-

nect with the soundbase automatically, please

press pair button on the rear panel of subwoof-

er to reconnect.

3 The subwoofer will memories the sound bar

and repaired automatically when you power

off the subwoofer then power on.

DSB 990 2.1

Made in P.R.Chin a

GSS1010

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Grundig GSB 910 SW Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info