Bedienungsanleitung Grundig GT77824WHF14 (Seite 56 von 68) (Deutsch, Englisch)

817089

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

56 Dryer / User Manual

When the child lock is activated,

the child lock warning indicator on

the screen turns on.

When the child lock is active:

The drying machine runs, or in stand-by state

the indicator symbols will not change upon

changing the position of the program selection

button.

When the drying machine is

operated and the child lock is

active, if the program selection

button is turned, a double beeping

noise will be heard. If the child lock

is deactivated before the program

selection button is turned to its

original place, the program will

be terminated since the program

selection button is displaced.

6.9 Changing the program

after it is started

You can change the program you selected to

dry your laundry with a different program after

the drying machine starts running.

• For example, Pause the program and turn

the On/Off/Program Selection button to

select the Extra Dry program in order to

select the Extra Dry program instead of

Ironing Dryness.

• Press the Start/Stand-by button to start

the program.

Adding and removing clothes

during stand-by

If you want to add or remove clothes to/from

the drying machine after the drying program

starts:

• Press the Start/Stand-by button to put

the drying machine in Stand-by state. The

drying operation stops.

• Open the loading door while in Stand-

by state, and close the door after you

remove or add laundry.

• Press the Start/Stand-by button to start

the program.

6.6 Warning indicators

Warning indicators may vary

depending on the model of your

drying machine.

Filter cleaning

When the program is completed, the warning

indicator for filter cleaning turns on.

Water tank

If the water tank fills up while the program

continues, the warning indicator starts flashing

and the machine goes into stand-by. In this

case, empty the water tank and start the

program by pressing the Start / Stand-by

button. Warning indicator turns off and program

resumes.

Cleaning of filter drawer/

heat exchanger

Warning symbol flashes periodically to remind

that filter drawer must be cleaned.

6.7 Starting the program

Press the Start/Stand-by button to start the

program.

Start/Stand-by and Drying indicators turn on to

show that program started.

6.8 Child Lock

The drying machine has a child lock which

prevents the program flow from being

interrupted when the buttons are pressed

during a program. When the Child Lock is

activated, all buttons on the panel except

the On/Off/Program Selection button are

deactivated.

Press the Audible Warning button for 3

seconds in order to activate the child lock.

The child lock has to be deactivated to be

able to start a new program after the current

program is finished or to be able to interfere

with the program. To deactivate the child lock,

keep the same buttons pressed for 3 seconds.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Grundig GT77824WHF14 Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info