544914
53
Zoom out
Zoom in
Vorherige Seite
1/64
Nächste Seite
53 / 64 EN
Dryer / User Manual
Operating the product
C
Additional laundry may be loaded
/ taken out during the End Time
period. At the end of the End Time
countdown process, End Time symbol
disappears, drying process starts and
the programme duration is displayed.
The time on the display is the total of
normal drying time and End Time .
Changing the End Time
If you want to change the time during
countdown:
1. Press On/Off/Cancel button for 3
seconds to cancel the programme. Restart
the machine and repeat the End Time
procedure for the desired time.
2. When your machine is operated for the
first time, it starts with the declaration
programme (wardrobe dryness for
cottons).
Canceling End Time function
If you want to cancel the End Time countdown
and start the programme immediately:
1. Press On/Off/Cancel button for 3
seconds to cancel the programme.
2. Press On/Off/Cancel button to start the
programme you have previously selected.
5.9 Starting the programme
Press Start/Pause button to start the
program.
Start symbol will light up to indicate that
the programme has started and “:” symbol
in the middle of the remaining time will keep
flashing.
5.10 Child Lock
Machine is equipped with a Child Lock
which prevents interfering with the current
programme flow by pressing any button. All
buttons except the On/Off/Cancel button
on the control panel are deactivated when the
Child Lock is active.
In order to activate the Child Lock, press
Audio Warning, Child Lock button for 3
seconds.
To start a new programme after the current
programme is over or to interrupt the current
programme, the Child Lock should be
deactivated. Press the same button for 3
seconds again to deactivate the Child
Lock.
C
Lock symbol will appear on the
display when the Child Lock is
activated.
C
Child Lock is deactivated when the
machine is switched off and on with
On/Off/Cancel button.
When the Child Lock is activated:
Display symbols will not change even if
the position of Programme Selection knob
is changed while the machine is running
or in halt.
If the Child Lock is deactivated after
changing the position of the Programme
Selection knob while the machine is
running, the machine stops and new
programme information is displayed.
5.11 Changing the programme
after it has started
After the machine starts, you can change the
selected programme and dry your laundry in
a different programme.
1. If you want to select Extra Dry programme
instead of Iron Dry programme, press the
Start / Pause button for 1 second to
stop the programme.
2. Select Extra Dry programme by turning
the Programme Selection knob.
3. Press the Start/Pause button to start the
program.
53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Grundig GTN 38250 G wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Grundig GTN 38250 G

Grundig GTN 38250 G Bedienungsanleitung - Portugiesisch, Spanisch - 76 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info