Bedienungsanleitung Grundig GTN 48261 GC (Seite 60 von 68) (Deutsch, Englisch)

544915

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

60 / 68 EN

Dryer / User Manuel

6 Easy use

6.1 Preparing the machine

1. Plug in the machine.

2. Place the laundry in the machine.

3. Press the On/Off/Cancel button for 1

second (long).

4. Machine starts with the declaration

programme (wardrobe dryness for

cottons).

6.2 Programme selection

1. Decide the appropriate programme from

the table below which includes drying

levels.

2. Select the desired programme with the

Programme Selection knob.

6.3 Auxiliary functions

Auxiliary functions

Audio Warning

Machine will give an audio warning when

the programme comes to an end. Use the

Audio Warning Level button to adjust the

volume level.

Spinning speed selection

Spin speed value used on the washing

machine and the programme time for the

drier can be changed by using the Spin

speed selection button. E.g. Spin speed

defined for wardrobe dryness for cottons

programme is 1000 rpm. Display time for

this spin speed is 145 minutes. User may

decrease the programme time to 135 minutes

by selecting 1200 rpm which is a higher spin

speed.

Spin speed is changed by pressing the

spin speed button as “Spin 1200”, “Spin

1400”, etc., Dryer automatically updates

the programme time after the spin speed is

changed.

Dryness level adjustment selection

Dryness level adjustment button is used

to set the required dryness level. Programme

duration may change depending on the

selection.

6.4 Starting the programme

Press Start/Pause button to start the

program.

The Start symbol that indicates the startup

of the program lights up. The “:” in the middle

of the screen will continue flashing. Drying

and progress of programme bar on the

display light alternately.

6.5 Canceling the programme

If you want to stop drying and cancel the

programme for any reason after the machine

has started to run, press and hold the On/

Off/Cancel button for 3 seconds.

6.6 End of programme

Lint Filter Cleaning and Water Tank warning

symbols light up in the programme follow-

up indicator and “Program Over” label

appears on the display when the programme

comes to an end. The loading door can be

opened and the machine becomes ready for

a second cycle.

Press On / Off / Cancel button to switch off

the machine.

6.7 Child Lock

Machine is equipped with a Child Lock

which prevents interfering with the current

programme flow by pressing any button. All

buttons except the On/Off/Cancel button

on the control panel are deactivated when the

Child Lock is active.

In order to activate the Child-proof

Lock, press and hold Audio Warning and

Child lock buttons for 3 seconds.

To start a new programme after the current

programme is over or to interrupt the current

programme, the Child Lock should be

deactivated. Press the same button for 3

seconds again to deactivate the Child

lock.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Grundig GTN 48261 GC Seite 60

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Grundig GTN 48261 GC

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info