135634
21
Zoom out
Zoom in
Vorherige Seite
1/31
Nächste Seite
20
Programming with the user guide
and manual data entry, variant 2
Preparation
Switch the TV set on.
Select the AV programme position for the video
recorder at the TV set.
w
!
If the recorder is connected to a TV set with Mega-
logic functions, the TV set is switched on automati-
cally, and the AV programme position is selected
automatically, when the h button is pressed.
Insert a cassette with sufficient playing time. Pay
attention to erase protection.
w
!
The time and date at the recorder must be correct.
Example
w
!
Operation can be terminated at any time using the
A button.
Call up the »Info « table using the h button.
Activate record programming using the G but-
ton.
– The »Record Programming « table appears.
The data is indicated on the TV screen and in the
display on the recorder.
w
!
If all TIMER positions are occupied you must erase
a TIMER position. See the chapter “Erasing an
occupied TIMER position” on page 19.
w
!
Only the on screen display is described in the
example.
w
!
If the first TIMER position is occupied, use the DC
buttons to select the next free TIMER position.
PROG DAT START STOP
> –––– –– ––:–– ––:––
–––––––––––––––––––
po CLEAR OK i
2
1
3
2
1
Programme a new recording. To do this press the
G button.
– The following appear in the data line:
a TV station, the current date, the current time as
start time, the current time plus 1 hour 30 minu-
tes as stop time, and VPS on (
*
).
Alter data for recording:
B
PROG. – the TV station,
B DAY – the date,
B
START – the start time,
B
STOP – the stop time,
Z
VPS (red) – VPS signal on/of,
Z
ED/EW (green) daily or weekly recording at the
same time.
w
!
If the picture/sound signal of an external unit, which
is connected to the corresponding sockets, is to be
recorded instead of a TV station, this programme
source must be selected using the B PROG. button.
The following appears in the data line instead of the
programme number and the station identification:
»A 1« or »A 2«, for example for a satellite receiver at
socket EXT. 1 or EXT.2.
Confirm programming using the G button.
The TIMER position is programmed. The remai-
ning playing time is indicated briefly.
– Display on Recorder: »TIMER «.
w
!
The recorder is in record stand-by mode. All drive
mechanism functions of the recorder are now
“blocked”.
w
!
The recorder “messages” and their meaning, as
well as options for alteration can be found on
page 19.
5
4
PROG DAT START STOP
10 CNN
01. 15:00 16:30
–––––––––––––––––––
RED: VPS/PDC GREEN: ED/EW
+/- CLEAR OK i
3
TIMER Recording
21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

grundig-gv-500

Suche zurücksetzen

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Grundig gv 500 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Grundig gv 500

Grundig gv 500 Bedienungsanleitung - Deutsch - 33 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info