Bedienungsanleitung Grundig RRCD 1400 (Seite 21 von 27) (Deutsch, Englisch)

755991

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

ENGLISH

CD/MP3 MODE -----------------------------------------------------------------------------------------------------------------

The device is suitable for music

CDs displaying the logo shown

here (CD-DA) and for CD-Rs

and CD-RWs with audio data

or MP3 and WMA formats.

In MP3/WMA mode, the terms

“album” and “file” are very im-

portant. “Album” corresponds

to a folder on a PC, “file” to a

file on a PC or a CD-DA track.

An MP3/WMA CD may not contain more than

511 tracks/folders in total.

When burning CD-R and CD-RWs with audio files,

various problems may arise which could lead to

problems with playback. This can be caused by

faulty software or hardware settings or by the CD

being used. Should such problems arise, contact

the customer services of your CD burner or soft-

ware manufacturer or look for relevant informa-

tion, for example on the Internet.

When you are making audio CDs, observe all

legal guidelines and ensure that the copyright of

third parties is not infringed.

Always keep the CD compartment closed to pre-

vent dust from collecting on the laser optics. Do

not attach adhesive labels to CDs. Keep the sur-

faces of CDs clean.

You can play standard 12 cm CDs as well as 8

cm CDs on your device. An adapter is not neces-

sary.

Automatic shutdown

If the device is in the “Stop“ position for more

than 15 minutes it automatically switches to

Stand-by mode. For further using switch on the

device again.

Selecting the CD/MP3 input source

1 Move the »CD TAPE/OFF RADIO« switch to

the »CD« position

2 Press »OPEN« to open the CD compartment.

3 Insert a disc in the compartment with its label

facing upwards.

4 Close the lid of the CD compartment.

– The device scans the content of the disc (Dis-

play: »– – –« flashes). The total number of

tracks appears in the display.

CD/MP3 playback

1 Start playback with »PLAY PAUSE eII«.

– Playback begins with the first track.

– Display: the current track number and »8«.

– Playback stops at the end of the disc.

2 Press »PLAY PAUSE eII« to pause playback.

– Display: »8« flashes.

3 Resume playback with »PLAY PAUSE eII«.

4 Press »STOP 7« to end playback.

5 Press »OPEN« to open the CD compartment

and take out the disc.

6 Close the lid of the CD compartment.

Repeating the current track

1 During playback, briefly press »5a «.

– The track is repeated from the beginning.

Selecting another track

1 During playback, press »5a « or »s6 « re-

peatedly until the number of the track appears

in the display.

– Playback of the selected track starts automati-

cally.

Searching for a passage within a

track

1 During playback, press »5a « or »s6 « and

hold down until the passage has been found.

– Playback begins if you release »5a « or

»s6 «.

Note:

During the search, the volume is reduced.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Grundig RRCD 1400 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info