ENGLISH
21
Switching on and off
1 Switch on the device with the required input source by moving the switch to the »CD
TAPE/OFF RADIO« position.
2 To switch off the device, move the »CD TAPE/OFF RADIO« switch to the
»TAPE/OFF« position and turn off the tape drive if necessary.
Selecting the input source
1 Select the input source (CD, TAPE or RADIO) using »CD TAPE/OFF RADIO«.
Adjusting the volume
1 Adjust the volume with »VOLUME«.
Switching the Ultra Bass System on and off
This function boosts the bass frequencies.
1 Switch the Ultra Bass System on and off with »UBS«.
Listening with headphones
1 Connect the headphones to the »0« headphone jack (ø 3.5 mm).
– This switches off the loudspeakers.
GENERAL FUNCTIONS
__________________________________
RADIO MODE
_________________________________________________
Antennas
1 For FM stations (VHF) extend the telescopic antenna.
Note:
If the FM signal is too strong, it is advisable to push in the telescopic antenna.
2 The radio recorder has a built-in rod antenna for MW reception. Turn the radio recorder
about its own axis to point the antenna.
Selecting the radio input source
1 Move the »CD TAPE/OFF RADIO« switch to the »RADIO« position.
Selecting radio stations
1 Select the frequency band (FM or MW) using »FM/MW«.
2 Use »TUNING« to select the radio station.
– The frequency is displayed on the frequency scale.
Stereo/mono reception
If the device receives an FM stereo station, the stereo indicator lights up green. However, if the
signal from the FM stereo station is weak, you can switch to mono reception.
1 Switch between stereo and mono with »FM MODE MONO/STEREO« (on the back of
the device).
