Radio (Tuner)
Select a range
FM range:
Press the
¢¢
RADIO button in quick
succession until the desired range »FM I«,
»FM 2« or »FM 3« appears in the display.
AM range: Press the
¢¢
RADIO button in quick
succession until »AM« (medium wave) or
»LW« (long wave) and the set frequency
appears. Medium wave and long wave form a
continuous range, so switching is not neces-
sary.
Last station memory
After you have selected the range, you hear
the last station/channel (last station memory)
in this range. Last station memory means
that the system notes the settings you have
selected, before you switch the system off.
After switching back on, you hear this station
or TAPE/CD again.
Stereo reception (only for FM)
You are receiving a stereo station if
»
ɳ « appears in the display.
Announcement stand-by for traffic
announcements (TP)
TP (TRAFFIC PROGRAM) = traffic radio station.
Switching TP on and off:
Press the
¢¢
TP-button briefly
.
Announcement stand-by switched on: The
»TP« symbol is displayed.
ǺǺ If the set station is not a traffic radio station,
a search for the next traffic radio station
begins.
Breaking off the current traffic announcement:
Press the
¢¢
TP -button briefly. The announce-
ment stand-by for traffic radio remains active.
í Traffic announcements begin at a minimum
volume:
In the EXPERT operating menu, you can change
the minimum volume at which traffic announce-
ments are heard. See page 14, EXPERT
ß?.
ǺǺ If you would like to hear only traffic announ-
cements, activate the “announcement stand-
by” function for traffic announcements with
the
¢¢
TP button and set the volume with the
W
VOLUME button at “zero”.
ǺǺ CD play is also interrupted during the traffic
announcement.
Alternative frequencies (AF)
When you receive an RDS program which is
broadcast by several stations at different fre-
quencies, the car radio automatically switches
to the frequency with the best reception.
ǺǺ When you are in an area with very poor
reception, attempts to change between diffe-
rent frequencies can be heard as disturbing
pauses. In such a case, the AF function can
be switched off.
The system is delivered with AF active.
Switching off the AF function
This is only possible for stations with alternative
frequencies.
Press the
¢¢
TP-button until the signal tone can
be heard.
The »AF« symbol is no longer displayed.
Switching the AF function back on
Press the
¢¢
TP- button until the signal tone can
be heard.
The »TP« symbol is displayed.
ķ
6
