ķ
14
Coding
ßI Volume limitation when switching on
»ON VOL - -« no limitation or
»ON VOL 20« max. volume e.g. 20
(setting range:
- - (0 ... 46).
The volume is only limited if the volume
when the radio is switched off is greater
than the set value!
ß? Minimum volume for traffic
announcements
»TA VOL 16« (5 ... 46)
During the setting, you hear the volume
selected for traffic announcements.
ǺǺ The code number of your car radio is lo-
cated on the Identity Card.
The coding is not activated at the factory.
If you have activated the coding of your car
radio:
As soon as the car radio is separated from
the car battery (or permanent positive
clamp 30), it is electronically protected.
It can only be operated again by entering
the code number.
Is coding activated?
Select the EXPERT control level and press the
Q
TUNING Wbutton until SAFE « or
»CODE« appears:
Coding activated
Coding is not activated
Activate coding
1 Select the EXPERT control level and press
the Q
TUNING Wbutton until »CODE«
appears:
Activate the setting:
Press the
¢¢
EXPERT button briefly. »- - - -«
flashes in the display.
2. Enter the code no. (see Identity Card) with
the buttons Q TUNING W or
¢¢
1 …
¢¢
4 (see example).
ǺǺ When the r TUNING t button is pressed
constantly, the system switches automati-
cally into rapid motion.
Example: 1703 Display:
Press the
¢¢
1 1button 1 x briefly >1 - - -<
Press the
¢¢
2 1button 7 x briefly >1 7 - -<
Press the
¢¢
3 button 10 x briefly>1 7 0 -<
Press the
¢¢
4 1button 3 x briefly >1 7 0 3<
If you press for a longer time, the particu-
lar number is counted backwards.
3. Confirm the code no.:
Press the
¢¢
EXPERT button briefly. In the
display, you see »SAFE«.
The coding is activated!
4. Switching off EXPERT
Press the
¢¢
EXPERT- until the signal tone
can be heard.
Expert
