Selio
G
- 11 -
4. A sc
Enter the time in HH/MM format.
5. Press
key to confirm. You will hear a confirmation tone.
7.2. Alarm clock
The alarm clock function arranges for your handset to ring once or each day (according to your
choice) at a time you programmed.
When the alarm clock is set of, the selected ring tone rings for seconds through the handset
loudspeaker and a warning screen
handset.
1. Press
, select " clock / al " using the or k .
2. Using or key, select "alarm ". Press
.
x To activate the alarm once, select "alarm once ".
x To repeat the alarm each day at the programmed alarm daily ".
x To deactivate the alarm, select " alarm off ".
3. Select your choice then press
:
Use the touch tone pad to enter the current ala
is HH:MM).
4. Press
key to confirm your selection. You will hear a
7.3. Modifying alarm
1. Press , select "clock / alarm " using t or key, Press .
2. Using or key, select " alarm tone ". Press
.
3 melodies are available : "melody 1 ", "melody 2" and melody 3 ".
3. Selec
4. Press
key to confirm your selection. You will
8. Customising the handset
8.1. Tone settings
8.1.1. Handset
You can choose from four ringer vol
1. Press
, select " settings " using the or key, .
2. Using or key, select handset tone " Press
.
3. "ring volume " appears on the scre
.
4. Five levels are avolume 1 ", …, " volume 5 ".
To deactivate the phone ringing on receiving cvolume off ".
The icon
is displayed on the screen.
5. Select the desired volume level
. You will hear a
confirmation tone.
Selio
G
- 12 -
8.1.2. Handset ringer melody
This function allows you to assign a ring tone for inco
1. Press
, select " settings " using the or key, Press .
2. Using or key, select " handset tone" Press
.
3. Using or key, select " ring " Press
.
4. Five tonesmelody ", …, " melody 5 ".
Select a tone then press the key
. You will hear a confirmation tone.
8.1.3. Key
This function allows you to activate or deactivate tones
keypad.
1. Press
, select " settings " using the or key, Press .
2. Using or key, select " handset tone" Press
.
3. Using or key, select "key tones " Press
.
4. Use or to select " ON" or " off" setting.
5. Press
key to confirm your selection. You will hear a
8.2. Handset naming
This function allows you to change the name of
1. Press
, select " settings " using the or key, Press .
2. "handset name " appears on the screen. Press
.
A screen displays the handset current name:
- Use the keypad to enter the new name (up to 10 characters).
- Use
key to delete wrong input if necessary.
3. Press
key to confirm. You will hear a confirmation tone.
8.3. Auto talk
(Refer to § 4.1.2 “Ans
When your handset is on the base station, automat
having to press the key
.
1. Press
, select " settings " using the or key, Press .
2. Using or key, select "auto answ" Press
.
3. Use or to select :
" Off " to deactivate the automatic pickup function.
"on " to activate the automatic pickup function.
4. Press
key to confirm your selection. You will hear a confi
Selio
G
- 13 -
8.4. Changing the base stat
1. Press , select " settings " usor key, Press .
2. Using or key, select "base tones" P
.
3. Using or key, select "ri " Press
.
Five levels are available: "volume 1 ", …, "volume 5 ".
To deactivate the phone ringing on receiving cvolume off ".
4. Select the desired volum
.
You will hear a confirmation tone.
8.5. Change the base station ringing tone
1. Press , select " settings " usor key, Press .
2. Using or key, select "base tones" P
.
3. Using or key, select "ri " Press
.
Five tones are available : " melody 1 ", …, " melody 5 ".
4. Select a tone the
. You will hear a confirmation tone.
8.6. Modifying t
1. Press , select " settings " using the or key, Press .
2. Using or key, select "lan" Press
.
3. A lis
Choose the desired language from the list or .
4. Press
key to confirm your selection.
8.7. Key lock
You can lock
1. Press key for 1 second, when the ke
show "keys l ".
2. To reco
key 1 sec or replace handset into the base cradle.
9. Advanced
9.1.
Association handset & base
This function allows you to register a new handset on your base station .
1. Press
. Select "advanced set" using the or key, press .
2. Using or key, select "registrati ". Press
.
3. Enter the 4 digit
is replaced by a «*».
Selio
G
- 14 -
4. Press key to confirm. The display shall show "WAITING" to indicate the waiting state.
5. Press and hol
key for 5 seconds (after 1 minute if no Hands
process the base goes back to standby).
Once the handset is registered, you will hear a confirmation tone. Th
automatically exits the registering mode.
When the handset has been successfully regis
is displayed on your handset screen.
Select the registration number.
If you do not select a registration number for your handset at this l
automatically assigned by the base station.
6. The handset am
on the screen saver
9.2.
Disassociation handset
This function allows you to remove the registration of a handset
may need to do this if you have l
the base station.
1. Press
. Select "advanced set " using the or k .
2. Using or key, select " de-register ". Press
.
3. Enter the 4 digit
is replaced by a «*». Press
key to confirm.
4. The li
Enter the number of the handset to be deleted. A c
5. In sunregistered ”.
9.3.
Base master PIN code
The base station code (default setting 0000) is required to access certain functions. This code
must include 4 digits.
1. Press
. Select "advanced set " using the or k .
2. "pin code " appears on the screen. Press
.
The base station code entry screen is displ
3. First enter your current PIN numb
by a «*». Press
to confirm.
4. Enter your new PIN number. E
5. Confirm by re-entering the new PIN number. P
to confirm.
You will hear a confirmation tone.
9.4.
Restoring the Handset / Base Defaul
To restore the handset and base station default settings:
1. Press
. Select "advanced set " using the or k .
2. Using or key, select "phone reset ". Press
.
3. A confirmUsing the handset keyboard:
- to cancel resetting, press the key
.
Selio
G
- 15 -
- to confirm resetting, press the key .
The initial parameters of the hands
4. You will hear a confirmation
9.5. Setting the "flash" access time
If you connect your telephone to a private automatic
country, you may need to modify the flash duration in order to use your telephone correctly with
regard to the following functionalities: outgoing 2nd c
Contact your administrator, who will supply the appropriate time period, and proceed to the new
settings.
1. Press
. Select "advanced set" using the or key, press .
2. Using or key, select "flash ti ". Press
.
3. Three choshort ", " medium " and " long ".
4. Select the appro
Press
key to confirm your selection. You will hear a
10. Battery replacement
Make sure that the handset is OFF before replacing batteries.
1. Remove
2. Remove
3. Insert
polarities in the battery compartment.
4. Refit
5. Placarge the batteries. B
the first time, new batteries must be charged fo
operation of the batteries.
To avoid any risk of explosion, make sure
round. Only use rechargeab
1.2V 550mAh, or equivalent. Do not throw batteries on a fire. This
explode. Dispose of batteries in accordance with th
10.1. Batt
- Do not burn, disassemble, damage or pierce batteries. Like other batteries
toxic materials could be released whic
- To reduce the risk of fire or personal injury, use the batteries in accordance with the
instructions provided in this user manual.
- Keep batteries out of children's reach.
- remove the batteries from the handset if storing over 30 days.
11. General product care
- To keep your telephone working and looking good, follow these guidelines:
- Avoid putting the phone near heating appliances and devices that generate el
noise (for example, motors or fluoresc
- DO NOT expose to direct sunlight or moisture.
- Avoid dropping and other rough treatment t
- Clean with a soft cloth.
- Never use a strong cleaning agent or abrasive powder because this
finish.
- Retain the original packaging in case you need to ship the phone at
Selio
G
- 16 -
12. Troubleshooting
12.1. Caus
x Aluminium
x Foil backing on insulation.
x Heating ducts and other metal construction can shield radio si
x You are too close to appliances such as mic
x Atmospheric conditions, such as strong storms.
x Base installed in the basement or lower floor of the
x Base is plugged into an AC outlet with other elect
x Baby monitor is using the same frequency.
x Handset
x You are out of range of the base.
12.2. Troublesh
12.2.1. Caller id
Problem
Solution
No display
x
Are the batteries fully charged? Repl
the batteries. Make sure that the
batteries are correctly installed and
connected.
x
Did you order Caller ID service from your
local telephone company?
12.2.2. Telephone
Problem Solution
No dial tone
x
Check installation:
x
- Is the base power cord connected to a
working outlet?
x
- Is the telephone line cord c
the base unit and the wall jack?
x
Disconnect the base from the wall jack and
connect another phone to the same jack. If
there is no dial tone in the second phone,
the problem might be your wiring or loc
service.
x
Is the handset out of range of the base?
x
Are the batteries correctly cha
hours)?
x
Are the batteries correctly installed?
x
Did the IN USE indicator come on?
Try to recharge the batteries.
Dial tone is OK, but can’t dial out
x
Make sure the tone/pulse setting is correct.
Handset does not ring
x
Make sure the RINGER setting on the
handset is programmed to ON.
x
You may have too many e
on your line. Try unplugging
x
See solutions for «NO dial tone».
Selio
G
- 17 -
You experience static, noise or fading
and out
x
Change channels.
x
Is handset out of range?
Move closer to the base.
x
Does the base need to be relocated?
x
Recharge the batteries.
x
Make sure base is not plugged into an
outlet with another household appliance.
12.3. Unit
- Place handset in base for 20 seconds to reset the security code. If th
recharge the batteries for 15 hours.
- Clean charging contacts on handset and base with a soft cloth.
- See solutions for «No dial tone».
- Replace the batteries.
12.4. Mem
- Did you program the memory location keys correctly?
- Did you follow proper dialling sequence?
- Make sure the tone/pulse setting is correct.
- Have you re-registered the numb
13. Guarantee
Terms and Conditions for United Kingdom only
In order to supply the guarantee, you s
Helpdesk. The proof of purchase will be required.
Please make usage of your equipment for the purpose for which it was designed and under
normal usage conditions. Sagem Communicat
made out of the frame of its original designed purpose and any consequence that may ari
from this usage.
Should any malfunctioning arise, the dealer or Sagem Communications Helpdes
you what to do.
A) General Guarantee conditions
SAGEM undertakes to remedy by repair or exchange at its
labour and replacement parts, an
twelve- months (3 -three- months for accessories), from the date of original invoic
Equipment, where those defects are a result of faulty workmanship.
Unless the customer has concluded with S
equipment which specifically provides for repairs to be carried out at the customer's premises,
the repairs will not be carried out on the equipment
must however return the defective equipment at hi
the dealer or Sagem Communications Helpdesk.
In case a product needs to be se
purchase (which is not altered, written on or in any way be made il
product is still under warrantee.
center will use the production date as a reference of warrantee status of the
product.
Selio
G
- 18 -
Apart from all legal obligatory rules, Sagem Comm
implicit or explicit which is not set force in the present section, and
for any direct or indirect, material or
guarantee.
If any provision of this guarantee shall be held to be in whole or in part invalid or illegal due to
an obligatory rule applicable to consumers pursuant to their national legi
or illegality shall not impair or affect the remaining provisions or part
This guarantee does not affect the Customer statutory rights.
B) Exclusions From Guarantee
SAGEM shall have no liability under the guarantee
•) Damage, defects, breakdown or m
– Failure to properly follow the installation proc
– An external cause to the equipment (including but not limited to: lightening, fire, shock,
vandalism, inappropriate conditions
nature)
– Modifications made without the written approval of SAGEM
– Unsuitable operating conditions, particularly of temperatu
– Repair or maintenance of the equipment by perso
•) Wear and tear from norm
•) Damage due to insufficient or bad packag
•) Usage of new versions of software without p
•) Work on any equipment
SAGEM
•)
workstations for the purpose of use of the equipment.
Communication problems related to an unsuitabl
– Problems related to access and/or connec
access networks or malfunction of the line used by the s
– Transmission faults (for example poor geographical coverage by radio transmitters,
interference or poor line quality)
– The local network fault (wiri
network (such as but not limited to interferences, fa
– Modification of the parameters of the c
Product
•) The normal servicing (as defi
malfunctioning due to servicing not being carried out. Servicing costs are in any event
always borne by the customer.
•) Malfunctions resulting from the usage of pr
compatibles with the equipment.
C) Out of Guarantee Repairs
In the cases set forth in B) as well as after expiry
ask the Authorized Sagem Repair Centre for a cost estim
The repair and delivery costs will be invoiced to the c
The foregoing shall apply unless otherwise agreed in writing with t
United Kingdom.
Helpdesk: 08 71 - 075 07 12
Selio
G
- 19 -
14. Environment
Preservation of the environment is an esern of Grundig. The desire of
operate systems observing the environment an
environmental performances
commissioning, use and elimination.
14.1.
Packaging
The presence of the logo (green dot) means that a contribution is pai
approved national organisation to improve pac
infrastructures.
To facilitate recycling, please respect the sorting rules set up locally
waste.
14.2.
Batteries
If your product contains batteries, they must be disposed of
collection points.
14.3.
The product
The crossed-out waste bin stuck on the product or its accessories means
product belongs to the family of electric
In this respect, the European regulations ask you to dispose of it s:
x At sales points in the event of the purchase of similar equipment.
x At the collection points made available to you locally (d
selective collection, etc.).
In this way you can participat
Equipment Waste, which can have an effect on th
253106070A
Dépliant LU 253106070A Sel
