Bedienungsanleitung Grundig SI 4550 (Seite 22 von 80) (Deutsch, Englisch, Französisch, Spanisch, Polnisch, Türkisch)

712290

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

ENGLISH

OPERATION ______________________________

Lime removing feature

(Self-Clean)

It minimizes the lime particles accumulated in

the steam reservoir of your iron.

Use the self-clean feature once in every 2 to 3

weeks. If the water in your region is very hard (if

lime particles fall down from the soleplate of the

appliance), we recommend to use the self-clean

function more frequently.

1 Unplug your iron.

2 Fill the water tank up to the MAX mark.

3 Plug in the appliance to a grounded wall

socket and set the temperature setting dial to

MAX.

4 Unplug the iron when the thermostat warning

light

turns oﬀ.

5 Hold the iron over the sink and press self

clean button

. During this process, the water

in the water tank comes down into the steam

generation reservoir quickly and is released

through the soleplate holes along with the lime

particles (if any).

6 When the entire amount of water is discharged

from the tank, release the self clean button

If the iron still contains impurities, repeat this pro-

cess.

7 After the lime removal process is completed;

plug in the iron and make sure that the iron

soleplate is heated. When the iron reaches to

the adjusted ironing temperature, unplug the

appliance and gently iron on an old cloth.

Keep ironing until the water and lime stains left

on the soleplate are removed. Wait until the

iron cools down before storing it.

Caution

Do not add vinegar etc. and other lime

removing substances into the water tank.

Lime protection system

(Anti-Calc)

The lime protection system in the water tank of

your iron prevents clogging of the steam holes.

Lime protection system is always active and there

is no need to replace it.

Automatic shutdown

If the appliance is hold stationary for 30 sec-

onds while in horizontal position, it will be au-

tomatically turned off.

If the appliance is hold stationary for 7-10 min-

utes while in upright position, it will be automati-

cally turned off.

If the appliance is hold stationary for 30 sec-

onds while in a leaned (right or left) position, it

will be automatically turned off.

If the appliance is moved in horizontal position

it will be turned on..

1 To reheat the iron, lift it up and move it gently.

The thermostat warning light

turns oﬀ.

2 When the temperature of the soleplate falls

under the set iron temperature, the thermostat

warning light

illuminates.

3 If the thermostat warning light

is illuminated

after moving the iron, wait until it turns oﬀ again

before starting to iron.

Note

If the thermostat warning light

is not illumi-

nated after moving the iron, the soleplate is

still at the required temperature and the iron is

ready to use.

In case of automatic turn off the auto-off light

flashes.

It may take 60 seconds for the soleplate

reach the previously set temperature.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Grundig SI 4550 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info