Safety
This device is designed for the playback of audio signals.
Any other use is expressly prohibited.
If the device is subjected to sudden changes in temperature, for example if it
is brought in from the cold to a warm room, let it stand for at least two
hours. Do not connect to the mains supply during this time.
Protect the device from moisture (water drops or splashes). Do not place any
vessels such as vases on the device. These may be knocked over and spill
fluid on the electrical components, thus presenting a safety risk.
When deciding where to place the device, please note that furniture sur-
faces are covered by various types of varnish and plastic, most of which
contain chemical additives. These additives can corrode the device sup-
ports, leaving residues on the furniture surfaces which can be difficult or
impossible to remove.
Do not use any cleaning agent, as this may damage the casing. Clean the
device with a clean, damp leather cloth. Never open the device casing.
No warranty claims are accepted for damage resulting from improper
handling.
The type plate is located on the bottom of the device.
Information
This device is noise-suppressed according to the applicable EU directives.
This product fulfils the European directives 89/336/EEC, 73/23/EEC and
93/68/EEC.
This device conforms to the safety regulation DIN EN 60065(VDE 0860)
and therefore the international safety regulation IEC 60065.
Technical data
Current supply 230 Volt, 50/60
Max. power consumption: <4.5 W (operation), <3 W (stand-
by, projector off), <4 W (stand-by,
projector on)
Output: DIN 45324, 10% THD 400 mW
Frequency bands: FM 87.5 ...108.0 MHz
Dimensions and weight: W x H x L 125 x 220 x 95 mm
Weight approx. 800 g
Environmental note
As little material as possible was used in the packaging of your device.
It consists of two separate materials: cardboard (box) and polyethylene
(bag). Please observe the local regulations for disposing of the packing
material.
Technical and design modifications reserved.
