Bedienungsanleitung Grundig Sonoclock 610 (Seite 8 von 10) (Englisch)

569638

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

Radio reception

• Switch the radio on and off with the ON/OFF

button.

–

'FM' lights up on the display when the radio is on;

•

Adjust the volume with the rotary control VOLUME.

– The wire antenna at the back of the set is used

for FM reception.

• Position the wire antenna so that optimum

reception is obtained.

Automatic tuning

• To activate automatic station search (

AUTO

TUNING), press << or >> until the frequency

display begins 'to run'; then release the button.

– The search stops as soon as a station is found

and tuned to.

• If the tuned station provides the RDS service, the

display shows the station name and the

symbol.

– Stations which are received with a weak field

strength may be skipped.

These can be tuned to manually.

Manual tuning

• Briefly press the << or >> button to tune in the

corresponding direction in individual steps.

• If you keep the button depressed, you can

rapidly scan large frequency ranges.

– When you release the button,

AUTO TUNING is

automatically switched to.

• If you briefly press one of the << or >> buttons,

manual tuning is switched to.

'Last Station Memory' function

Your unit is provided with the function '

LAST STATION

MEMORY', which means that the station that was

playing when the set was switched off will be

selected again when the unit is switched back on.

Display mode

After tuning to an RDS station, the display indicates

its frequency for 1.5 seconds and the station name

for 3.5 seconds, and then it returns to normal time

indication.

• To display the frequency and the station name

again, briefly press the << or >> button once.

• To display the station name continuously, press

the DISPLAY button twice within five seconds.

• To return to normal time indication, press the

DISPLAY button once more.

Storing stations

There are 10 memory locations available for

storing stations.

• Tune to the station you want to store .

• Press MEM.

– The indication 'MEMORY' starts flashing on the

display for 8 seconds.

• Press the number (1…10) you want to assign the

station to.

– Press the button once for a number from 1 to 5

and twice for a number from 6 to 10.

• Press MEM again to store the station.

• Select and store in this way all desired stations.

Note:

If no station is stored within the 8 seconds

that 'MEMORY' is flashing, the storing mode is

abandoned with no change to the current memory.

Calling up a stored station

• To call up a stored station, simply press the

corresponding button.

– Press the button once for a number from 1 to 5

and twice for a number from 6 to 10.

– The unit switches to the station and the display

indicates the frequency, 'MEMORY' and the

memory location number.

MEMORYMEMORY

RADIO

SC610 page 14

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Grundig Sonoclock 610 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Grundig Sonoclock 610

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info