12
Clock operation
When you insert the batteries into the device for the first time, the time
flashes in the display to indicate that you must set the clock.
Setting the clock
1 Press and hold down »TIME SET«.
2 Press »FWD/HR« to set the hours and »REV/MIN« to set the minutes.
3 Press »FWD/HR« or »REV/MIN« once to move forwards in steps of
one hour or one minute.
Note:
If you hold the buttons down longer than 0.5 seconds, the time increases
continuously.
Switching between 12 and 24 hour format
In the 12 hour format the time displays in the morning and the afternoon are
identical. The abbreviations AM and PM are therefore used to differentiate
between the morning and the afternoon. If you select 12 hour format »PM«
appears in the display after noon. There is no additional identification in the
morning.
1 Press »ON/OFF« to switch off the device.
– The time appears in the display.
2 Press »FWD/HR« and »REV/MIN« at the same time and hold them
down for 2 seconds.
– The time shown in the display changes between 12 and 24 hour for-
mat.
3 To change the format again repeat step 2.
Time display
During radio operation you can select permanent time display or frequency
display.
1 Press »ON/OFF« to switch on the device.
– The frequency of the station you were last listening to appears in the
display. After a short time the set time appears continuously.
2 Press »TIME SET«.
– The current frequency is displayed continuously.
3 Press »TIME SET« again.
– The display changes and the set time is displayed continuously.
Note:
If you press »STATION 1 ... 4«, »FWD/HR« or »REV/MIN« while
the time is displayed, the current frequency briefly appears.
OPERATION
_______________________
30
28
:
29
15
:
38
8
:
PM
2
78
5
.
MHz
FM
