ķ
15
Specification
r
Mains voltage:
220 – 240V, 50/60Hz
(power supply control range 165 … 265V)
This unit may only be operated with the power
supply cable set which has been supplied. It pre-
vents interference from the mains, and is consi-
dered an obligatory component of this unit.
For a replacement, contact the nearest customer
service center and order only the power supply
cable set with the following designation:
GWN 9.22/article number 8290.991-316.
r
Power consumption:
approx. 70 W
Standby: 9 W
r
Channel coverage:
C01 … C99
Special channels S01 … S41
r
Sound output:
2 x 8 W music power (2 x 4 W sine power)
This unit conforms to VDE safety regulations and
directives of the Deutsche Bundespost (German
Federal Post Office; see certification mark on the
type sticker on the rear of the unit), as well as all
relevant ordinances governing X-ray emissions.
The picture tube, which emits X-rays, is sufficiently
shielded and therefore represents no danger.
Accelerating voltage is max. 29kV with a mean
beam current of 1,0mA.
Unauthorized tampering with the unit, in particular
making adjustments to the high voltage system, or
installing a different picture tube, can considerably
increase X-ray emissions. Units so altered no
longer conform to applicable safety regulations and
may not be operated.
Subject to alterations. E. and O.E.
r
Pin Assignment of EURO-AV Socket
If you want to connect other devices to your televi-
sion (for example, a computer or amplifier), your
dealer can provide you with a normed standard
connection by means of the following table:
Pin Signal
1 = Audio output right
2 = Audio input right
3 = Audio output left
4 = Audio, earth
5 = Blue, earth
6 = Audio input left
7 = RGB blue input
8 = Switching voltage
9 = Green, earth
10 = –
11 = RGB green input
12 = –
13 = Red, earth
14 = Earth
15 = RGB red input (chroma for SVideo)
16 = RGB switching voltage
17 = Video, earth
18 = RGB switching voltage, earth
19 = Video output
20 = Video input
21 = Shielding/earth
