ENGLISH
29
SETTINGS
____________________________________________________________________________
»Channel position set-up« sub-menu (?)
The receiver is already pre-programmed for the current channels of many satellites. In most cases,
no correction will be required.
However, new channels are continuously being added, or transmission frequencies being changed.
The current status of the transmission frequencies can be called up via the Teletext pages of various
channels (e.g. SAT 1 or 3SAT), or can be found in a current satellite TV magazine.
You can then programme these channel positions in the "Channel position set-up" sub-menu and
you will have access to the image and sound settings of the individual channel positions.
1 Press the »Ǻ« button followed by the »2 « button to display the »Channel position set-up«
sub-menu.
Key to symbols:
?
03 Channel position number
ʐʐ
11.494 GHZ Transmision frequency of the selected satellite
channel position:
$ V / – / A1 LNC settings:
Polarization V (vertical) H (horizontal)
–
Switching signal 22 kHz off
~
Switching signal 22 kHz on
Satellite selection A1/B1/A2/B2
ʀʀ ǁǁ
7.02 MHZ 7.20 MHZ Left/right sound carrier frequency
ǁǁ
~
PANDA BW 1 PANDA, 50µs (50US), J17
(de-emphasis/noise reduction)
Bandwidth setting: (BW 1, 2, 3 or 4)
{
+1
Contrast levels 1 and 2 setting
/
–
/
–
Decoder settings
OK Save and exit menu
Ǻ Exit menu
??
1
ʐ 11.494 GHz
$
V / – / A1
ʀǁ 7.02 MHz 7.20 MHz
ǁ~ PANDA BW 1
{
+1
//
–
/
–
Ǻ
/
OK
