24
TIMER PROGRAMMING
____________________________________________________________
Setting the time and day (
ȄȄ
)
Note:
If a mains
failure occurs or when you disconnect the mains plug, the time
is cleared and must be
set again.
Check the time and day and correct the setting if necessary.
1 Select the »
ѕѕ
19:28 SUN« row using the »
,,..
« buttons.
2 Use the »
..
« button to switch from hours (0 … 23) to minutes (0 … 59) and day, and the »
,,
«
button to switch back from day to minutes (0 … 59) and hours (0 … 23).
3 Enter the current time with »1 … 0 «, or select it with »
;;::
«.
4 Select the day with »
,,..
«, enter the current weekly day with »
;;::
«.
5 Confirm the setting with »OK«.
– The main menu reappears on the picture screen.
Selecting a timer position 1 - 4 (
ѕѕ
)
Note:
Timer position 1 is a „Quick Timer“. If this position is selected, the timer is started 2 minutes after
the current time and stopped 2 hours and 2 minutes after the current time. In this way you may
start 2-hours recordings directly. It is of course also possible to select the time manually in the
same way as with the other timer positions.
1 Display the timer menu »1:
Ȅ
« by pressing »1« .
– The first row »
ѕѕ
1« is highlighted.
2 Enter the timer position number with »
;;::
«.
ѕ 1
??
001
ѕ ●
ı
WED WEEK 2
ѕ ●
ı
20:03
ѕ ●■ 22:03
ѕ –
ѕ 19:28 SUN
Ǻ / OK
