Bedienungsanleitung Grundig SX 8570 (Seite 21 von 80) (Deutsch, Englisch, Französisch, Spanisch, Polnisch, Türkisch)

712287

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

21ENGLISH

OPERATION ______________________________

Preparation

1 Remove all packaging materials, labels and

protective foil and dispose of them according

to the applicable legal regulations.

2 Clean the outer parts of the appliance as de-

scribed in the section “Cleaning and care“.

3 Place the appliance on an even, stable, dry

and non-slip surface.

Notes

During the first use, a light odour may arise from

the iron. This ceases after a couple of uses.

The “CLICK” sound you hear during ironing, is

because of the anti-drip feature of your appli-

ance. This is a normal sound.

In order to generate steam, the soleplate

of your iron has to rise to a certain level of tem-

perature. By means of the “anti-drip” feature of

your iron, water dripping from the soleplate

of the iron shall be prevented until the soleplate

attains the temperature required.

Your product is intended for use with tap

water. If your tap water is excessively limy, we

recommend using a mixture of tap water with

purified water. Prior to ironing for the first time

fill twice and vaporize. Meanwhile, use the

steam burst

frequently. In this way, both the

steam performance will improve and also the

dust particles which might have penetrated

through the steam channels will be cleaned up.

If water runs out during ironing, you can top

up water without waiting for the appliance to

cool down. But do not forget to unplug it before

topping up.

When spray does not squirt water, in order to

eliminate any possible blocking, close the spray

hole with your finger and press on the spray

button several times.

Caution

When your iron is filled with excessive water,

it may overflow. To avoid this, when you hold

your iron horizontally, make sure that the level

of water in the appliance does not exceed the

MAX. line.

Caution

Always read the care label on your garment

before setting the temperature.

1 Set the required ironing temperature. Do not

press the steam burst button

during dry iron-

ing.

2 After ironing let the appliance cool down in a

location that is safely out of reach of children.

Filling in the water tank

1 Always unplug the appliance.

2 Open the water reﬁll lid on

the iron. Use

the pouring cup to ﬁll the water tank up to the

MAX level.

3 Close the water reﬁll lid

Note

Even when ironing garments without steam;

water should be available in the appliance in

order to use the water spray

Do not fill the water tank with perfume, vinegar,

laundry starch, lime removers or other products

or chemicals which shall facilitate the ironing

process.

If your tap water is excessively limy, we recom-

mend to using a mixture of tap water with puri-

fied water.

Setting the temperature

1 After plugging in the iron, set required iron-

ing temperature by turning the temperature

setting dial

to the appropriate position

(please see the below table for temperature

setting).

2 The temperature of your appliance can be in-

creased by turning the temperature setting dial

clockwise. For steam ironing temperature

setting dial

should be in the range which is

restricted with the steam mark.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Grundig SX 8570 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info