Bedienungsanleitung Grundig UC 5020 (Seite 8 von 12) (Englisch)

712340

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

ENGLISH

Before first use

Remove the transparent protection sleeve on

the On/Off switch

panel before using the

appliance for the first time.

Cleaning sensitive and small objects

1 Open translucent lid

and fill the stainless steel

tank

with water.

Caution

Do not exceed the “MAX” marking.

Do not operate the appliance without filling with

water, otherwise it will get damaged.

Use only clear, cold water.

2 Put the object in the plastic cleaning basket

3 Place the plastic cleaning basket

into the

stainless steel tank

4 Close the translucent lid

5 Plug the power cord

into a suitable power

outlet.

– Power on indicator light

illuminates for a

few seconds and disappears.

6 Press the On/Off switch

– The power on indicator light

illuminates and

the cleaning operation starts. It takes 5 minutes

for the appliance to finish cleaning operation.

7 When the cleaning operation finishes, the

appliance automatically stops and the power on

indicator light

disappears.

8 After using the appliance, disconnect the power

cord

from the power outlet.

9 Open the translucent lid

and take out the

plastic cleaning basket

with the object. Pour

out the water and clean the appliance. See the

“Cleaning and care” section.

Notes

You can put multiple of jewelries at the same time.

Put the glasses in the plastic cleaning basket

always with the glasses in upward position.

Plastic cleaning basket

absorbs one third of

the ultrasonic energy and decreases the cleaning

power. So it might be necessary to repeat the

cleaning operation more than once.

Be sure that the water level does not exceed the

“MAX” marking after placing the objects into the

Stainless steel tank

. If the “MAX” marking is

exceeded, take an object out until the water level

again matches with the “MAX” marking.

The object should be immersed well into the

water.

Do not press On/Off switch

while power on

indicator light

illuminates for a few seconds.

Press it after the light disappears.

The appliance has an integrated timer for 5

minutes of operation.

If you want to stop the cleaning operation earlier

than 5 minutes, press the On/Off switch

Cleaning metal bracelets of

waterproof watches

1 Open translucent lid

and fill the stainless steel

tank

with water.

Caution

Make sure that the watch is waterproof and

suitable for cleaning in the Ultrasonic Cleaner.

Do not exceed the “MAX” marking.

Do not operate the appliance without filling with

water, otherwise it will get damaged.

Use only clear, cold water.

2 Place the watch onto the plastic watch stand

the plastic cleaning basket

3 Place the plastic cleaning basket

into the

stainless steel tank

OPERATION ________________________________

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Grundig UC 5020 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Grundig UC 5020

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info