Bedienungsanleitung Grundig WK 5340 (Seite 10 von 14) (Englisch)

673636

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

ENGLISH

OPERATION ________________________________

Preparation

1 Remove all packaging material and stickers.

Dispose of them according to the applicable

statutory regulations.

2 Before using the appliance for the ﬁrst time,

carefully clean all parts that come into contact

with water. (See the “Cleaning and care” section.)

3 Unroll the power cord

from the base

. Pass

the power cord through the slot on the base.

4 Open the lid by squeezing the lid release buttons

together and lifting it oﬀ.

5 Fill the water tank

with water.

6 Put the lid

on and push down to secure it

into place.

7 Set the kettle on its base

. Make sure the kettle

is sitting correctly on the base and that both parts

are in a stable position. Make sure that the base of

the kettle is placed on a heat-resistant, even, stable,

dry, non-slip surface.

8 Slide the open/close push button

to the closed

position to make sure no water or steam can come

out of the spout. No red is visible on the button

when it is in the closed position.

9 Insert the plug

into an earthed wall socket.

10 Clean the kettle to remove any manufacturing

residues:

a. Press

to turn the kettle on and boil it.

b. Discard the boiled water.

c. Fill the kettle again and repeat steps 10a and

10b.

Operation

To set up the kettle, follow steps 4-9 above.

Notes

 Do not place the water tank

on the base

while

ﬁlling it with water.

 Never ﬁll the water tank

above the maximum

level indicator or below the minimum level indicator.

Boiling water only

1 When the kettle is placed on its base, the icon

and 100°C appear on the LCD screen.

2 To boil the water, press

Notes

 The icon ﬂashes to show the kettle is boiling.

The icon stops ﬂashing when the kettle turns oﬀ.

 The LCD screen illuminates for 10 seconds after the

kettle turns oﬀ.

Heating water to your desired

temperature

1 When the kettle is placed on its base, the icon

and 100°C appear on the LCD screen.

2 Press

until the icon appears.

3 Press or to set the temperature. The

temperature is adjustable from 40°C to 100°C in

5°C increments. The default setting is 100°C.

4 Press

to heat the water to your set temperature.

Notes

 The icon

ﬂashes to show the kettle is boiling.

The icon stops ﬂashing when the kettle turns oﬀ.

 The LCD screen illuminates for 10 seconds after the

kettle turns oﬀ.

Notes

 To manually stop the kettle at any time, press

 The lid should always be closed during the heating

process. If the lid is not placed on the kettle, the

kettle will stop to function.

 When you remove the kettle from the base, all

settings will be deleted and it will return to the

default setting.

Keeping water warm

Your kettle can keep water warm for up to 40 minutes at

a preset temperature.

1 Press

until the keep warm icon appears.

2 Press or to set the temperature. The

temperature is adjustable from 40°C to 90°C in

5°C increments.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Grundig WK 5340 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Grundig WK 5340

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info