ķ
17
GB
Coding
Deactivating the coding
before removing the car radio, for example.
1. The EXPERT mode must be switched on
and "SAFE" indicated in the display.
Activate the setting: briefly press the
¢¢
EXPERT button. In the display flashes
"1 - - - -".
2. Enter the code number (on the Identity Card)
with the r
TUNING t or
¢¢
1…
¢¢
4
buttons as described under "Activating the
coding".
3. Confirm the code number.
Press the
¢¢
EXPERT button until "CODE"
appears briefly in the display.
The radio will play after approximately
3 seconds.
Coding is deactivated!
If you have entered the incorrect code
number:
"SAFE" remains in the display and the radio
does not play.
Begin again. Be sure to observe the waiting
periods between attempts (see page 18).
ǺǺ Your personal code number is on the iden-
tity card of your car radio.
Coding is not activated when the radio
leaves the factory.
If you have “activated” your car radio's
coding: As soon as you disconnect the car
radio from the car battery (or permanent
plus terminal 30), it is electronically
blocked.
Only you are able to put it back into opera-
tion by entering your personal Code Number.
Is the coding activated?
Activate the EXPERT mode and press the
r
TUNING t buttons until the display indi-
cates "SAFE" or "CODE".
Coding activated.
Coding not activated.
Activating the coding
1. Select the EXPERT control level and press
the r
TUNING t buttons until "CODE"
appears in the display.
Activate the setting:
Briefly press the
¢¢
EXPERT button. In the
display flashes "- - - -".
2. Enter the code number (on the Identity Card)
with the r TUNING t or
¢¢
1 …
¢¢
4
buttons (see example).
ǺǺ Hold down the r TUNING t buttons to
alter the number at high speed.
Example: 1703 Display:
Button
¢¢
1 11 brief pressure >1 - - -<
Button
¢¢
2 17 brief pressures >1 7 - -<
Button
¢¢
3 10 brief pressures >1 7 0 -<
Button
¢¢
4 13 brief pressures >1 7 0 3<
Pressing a button a longer time counts the
respective digtit backwards.
3. Confirm the code number:
Briefly press the
¢¢
EXPERT button. In the
display appears "SAFE".
Coding is activated!
4. Deactivate the EXPERT control level:
Press the
¢¢
EXPERT button until the signal
sounds.
