Bedienungsanleitung Guardo DR100 Drone (Seite 7 von 25) (Deutsch, Englisch, Holländisch, Französisch)

639839

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

-7-



n°

 

2 le When the device has deviated too much to the right, press the

buon to the le to adjust the deviaon

right When the device has deviated too much to the le, press the

buon to the le to adjust the deviaon

3 up When the device has deviated too much to the back, press the

buon upwards to adjust the deviaon

down When the device has deviated too much to the front posion,

press the buon downwards to adjust the deviaon

10 up When the device has deviated too much downwards in altude,

press the buon upwards to adjust the deviaon

down When the device has deviated too much upwards in altude,

press the buon downwards to adjust the deviaon

11 le When the device has deviated too much to the right in rotaon,

press the buon to the le to adjust the deviaon

right When the device has deviated too much to the le in rotaon,

press the buon to the le to adjust the deviaon

You can adjust the speed of the drone in 3 levels (beginner – intermediate – advanced). The speed

can be controlled with the speed-switch (8).

This device can also make loopings. By pressing the Flip-buon (5) and indicang a direcon with

the right joysck controller, the drone will make a looping in the direcon you have indicated.

To turn the LED lights on or o, press the LED ON/OFF buon (7).

When turning the drone on it is standard in the normal mode. This means that its head (indicated

with FRONT) will always be the front direcon of the drone. Any direcon you command the

drone to y in, it will always keep the head as its front.

The device also has a Headless-mode. This means that the front of the device depends on the

direcon you’re ying in. This means that also the sides or the backside can be seen as the front.

To acvate this mode, press the LED ON/OFF (7) buon for a few seconds. To exit this mode, press

the LED ON/OFF buon (7) again for a few seconds.

            



The device has an Auto Return funcon. When you acvate this funcon, the drone will y the

own trajectory again in the opposite direcon to reach the original point of departure. You can

acvate the Auto Return funcon by pressing the Flip buon a few seconds.

Please note that the Auto return funcon does not calculate deviaons by wind or other sources.

The original point of departure may vary because of these phenomena.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Guardo DR100 Drone Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info