628789

Gude 1800-12 V 55128 Seite 11

11
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
• SPARE PARTS AND ACCESSORY EQUIPMENT
Original spare parts may only be used for servicing. The
warranty will not apply when other parts are used. Parts
and accessory parts considered to be used with this
appliance may only be used. The respective parts can
be obtained from Güde GmbH & Co. KG.
Special instructions for using this
electric winch
The use of this power appliance may lead to special
dangerous situations. The use requires a special caution to
provide safety of the operator and other persons.
Cable:
Check whether the cable is in a good condition and whether
fixed properly. Do not use the winch if the cable is worn
through. Do not change the cable for a cable that is less firm.
Battery:
Check whether the battery is in a good condition. Avoid any
contact with the accumulator acid or any other harmful
substances. Use appropriate eye protection equipment for
works on the battery. Let the engine run when using the
winch to prevent the battery from discharging.
Keep distance:
Do not stand in the cable pull direction. If the cable slips off or
pulls apart, it gets shot in that direction. If the winch is being
operated, avoid any contact with hands, clothing, hair or
jewels near the winch. Invite another person who will check
whether the winch can be used safely. Before starting the
winch, make sure such person keeps sufficient distance from
the vehicle and the cable.
Performance limits:
Do not try to exceed the limit values for the pulling force of
this winch.
Never use the hand crank to “support” the winch. This would
damage the winch and could cause injuries.
Secure the pulled load before releasing the cable on the
winch.
Installation (pic. E)
Connection of electric winch cables
The winch cables can be connected temporarily or
permanently:
1. Lift the rubber gasket and put the cable outlet to the plug
on the right of the winch body. Put the cable from the
winch to the battery and make sure it does not get to the
rotating parts and the risk of tripping is prevented.
2. Connect the black terminal on the cable to the vehicle
frame to form ground connection. Connect the red
terminal to the positive pole (+ / red) of the battery.
Notice: Make sure the battery used is a 12 V car battery
or a similar battery in a good condition.
Caution: the appliance cannot be connected to a
vehicle lighter.
3. Lift the rubber gasket on the left of the winch body.
Grasp the remote control and put the outlet on the cable
end to the plug on the left of the winch body.
4. Put the remote control on a safe place until the winch is
ready to be operated.
CAUTION!
1. Red and red (positive and positive) and black with frame
to be connected at all times – as ground connection if
the battery of the vehicle is used as a source of current.
2. Never use the winch or any other accessory equipment
until
the battery gets discharged to the full extent.
3. If the engine is running when the winch is being
operated to make the battery charged, maximum
caution is necessary for works on the vehicle and
around the vehicle.
4. Any dirty, corroded or leaking battery must not be used
as the leaking acid could cause a risk of injury.
5. For all works on the battery or with the battery,
protective glasses meeting applicable requirements for
works of that type must be worn.
Winch installation (pic. B, C, D)
The winch has been dimensioned in a way it can be
temporarily installed using foxing equipment for
attachment.
1. Hook the adapter plate to the winch basic plate using
the three pin screws.
2. The assembly comprising the winch and adapter plate
can be fastened to the attachment by putting the
spherical head through the given opening in the adapter
plate.
Using the winch (pic. F, G, H, I)
1. Put the vehicle transmission to an idle position (never
use the winch when a gear is engaged or the park
braking system applied as the vehicle transmission
could get damaged). Apply the hand brake. Support the
wheels by suitable wedges to prevent the vehicle from
moving.
2. To lift the cable, press the respective switch on the
remote control and put it out of the coil with slight
tension. Leave at least three cable windings on the coil
at all times to prevent the cable from pulled out of the
coil. Alternatively, the rope may also be pulled out using
the coil idle function. For that purpose, turn the coupling
knob (pic. 1/10) clockwise and release it. Pull the rope
out to the required length. Keep at least three windings
on the coil.
3. Hook the cable using the hauling rope, chain or hook it
in any other suitable manner to the pulled object. Never
put the cable around any object and then hook directly
to the rope as the pulled item would get damaged by
this and the cable could pull apart or fray.
4. Retighten the coupling knob.
5. Move back to a safe place from where operate the
remote control switch in a way to draw the cable and
pull the item using the winch in the required manner.
6. When lowering the load, press the respective remote
control switch and release slowly.
CAUTION!
1. If the winch is being operated, avoid any contact with
hands, clothing, hair or jewels near the drum and cable.
2. Never use the winch if the cable is frayed, broken or
damaged.
3. Never let anyone standing near the cable or at the winch
in line with the cable if pulling force is being applied on
the cable. If the cable slips off or gets broken, it may
suddenly shoot backward and put all bystanders at risk.
If the winch is being operated, all persons must be in
sufficient side distance from the winch.
Operation with the idle pulley (pic. K, L, M)
Pulling force
1. The winch has a pulling force of 1800 kg without the idle
pulley and 3600 kg with the idle pulley. As a result, the
winch may be practically used for the following:
11
… 11 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gude 1800-12 V 55128 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info