Bedienungsanleitung Gude 24313 (Seite 9 von 41) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

628806

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

2 = starting/functional lever

A = set screw

B = set nut

1. With the fork being lifted while pumping in the

NEUTRAL position, screw the set nut (A) on the set

screw (B) in the clockwise direction until the fork is

not going up by pumping and the NEUTRAL position

is not working as it usually does.

2. With the fork being lowered while pumping in the

NEUTRAL position, screw the set nut (B) counter-

clockwise until the fork has been fully lowered.

3. With the fork not being lowered and the functional

lever (2) being in the LOWER position, screw the

set nut (B) in the clockwise direction until the fork is

lowered by pressing the functional lever (2). Then the

NEUTRAL position needs to be checked as

described in steps 1 and 2 to make sure the nut has

been set properly.

4. With the fork not being lifted while pumping in the

LIFT position, set the nut (B) counter-clockwise until

the fork starts going up when pumping in the LIFT

position. Then check the LOWER and NEUTRAL

positions as described in steps 1 + 2 + 3.

Safe operation instructions

1. The user must read all warning instructions and

directions before using the truck.

2. Do not operate the forklift truck until being properly

familiarised with the appliance and receiving handling

instructions.

3. Do not operate the forklift truck until making sure it is

in a perfect condition. In particular, pay attention to

the wheels (L226, L306, L241), drawbar, fork,

pressure release lever (L345), etc.

4. Do not use the truck on a dirty or wet surface.

5. Do not use the forklift truck to transport persons.

6. The worker operating the truck should wear protective

gloves.

7. After loading the truck, all persons must be at least

600 mm from the fork.

8. Do not load the truck as is shown in pic. 2 B.

9. Do not exceed the maximum carrying load when

loading the truck.

10. The user should operate the forklift truck carefully

while meeting applicable local conditions at the same

time.

EU DECLARATION OF CONFORMITY

We,

Güde GmbH & Co. KG

Birkichstraße 6

D-74549 Wolpertshausen

herewith declare that the conception and construction of

the below-mentioned trucks and their design and type, as

brought into circulation by us, comply with the appropriate

basic safety and health requirements of the EU Directives.

In case of alternation of the truck, not agreed upon

by us, this declaration will lose its validity.

Machine description: Forklift truck

Article No. 24313, 24314

Date/authorised signature: 7 Jul, 2010

Title of signatory: Managing Director

Mr Arnold

Technical documentation: J. Bürkle FBL; QS

Applicable EU Directives:

2006/42 EG amendment I/05.06

Applicable harmonised standards:

EN 1757-2 :2001

ZEK 01.2-08/12.08

Place of certification:

TÜV Rheinland

Reference No.

01-ZLN-09832343 014

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gude 24313 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info